Search Results

Search Help: 

Are you searching for editorials or for product specifications?
Your results are sorted by two tabs. If you are searching editorial, the right tab highlights case studies, reviews etc. If you are searching for a product in the e-shop, please choose the left tabs.
hammerbohrer-a-konus-bund_500x500

Hammer drill A cone with flange

Installation Tools

masonry, concrete, natural stone
Schraubenheber

Nail puller

Installation Tools

with 2 component handle
Pro-GAP10-GF_01-500x500px

Pro GAP Giga Flex

Reveal beads with mesh

Self-adhesive plastic profile with glass fiber mesh, co-extruded flexible thermoplastic elastomer loop and bendable protective flap with self-adhesive transfer tape

Pro-GAP09-AF_01-500x500px

Pro GAP Active Flex

Reveal beads with mesh

Self-adhesive plastic profile with glass fiber mesh, co-extruded flexible thermoplastic elastomer loop and bendable protective flap with self-adhesive transfer tape

Hammerbohrer-sds-plus_1200x1200

Hammer drill SDS-plus with 4 edge geometry

Installation Tools

Series drilling in hard concrete
Solarbefestiger JA3 mit ORKAN-Kalotte Trapez

Solar Fastener set JA3-SB-8.0xL with E16 + ORKAN storm washer

Solar Fasteners

For wooden substructure
JT3-SB-8-0-FZD

Solar Fastener set JT3-SB-3-8.0 xL with FZD fibre cement seal

Solar Fasteners

Produktbild1

Solar Fastener set JT3-SB-3-8.0xL with E16 + ORKAN storm washer

Solar Fasteners

For steel substructures

Nut socket S A/F13-1/4

Nut socket S A/F13-1/4"x50 for M8 threaded connection

Installation Tools

For fasteners with M8 threaded connection
Solarbefestiger JA3 mit Faserzementdichtung

Solar Fastener set JA3-SB-8.0 xL with FZD fibre cement seal

Solar Fasteners

For wooden substructure
Setzbolzen HSBR 14 magziniert für P 560

HSBR drive pin 14 collated for P 560

Direct Assembly

For high strength substructures
JT2-3-4.8

JT2-3-4.8

Self-drilling Screws

profiled steel sheets to steel substrate
JF3-2H-4-8_foto1

JF3-2H-4.8

Self-drilling Screws

Side lap stitching of profiled steel / aluminium sheets and sandwich panels
JT3-ST-2-6,0

JT3-ST-2-6.0

Self-drilling Screws

amongst others, rail systems to steel/alu timber substructure
FDS_Startbild_NEU

FDS®

Flow drill screws for high-strength sheet metal
FPS-E-8,0

FPS-E-8.0

Concrete / Aerated Concrete Screws

Roofing membrane on aerated concrete
[TKR-4_8].png

TKR-4.8

Self-drilling Roof Screws

Fastening stress plates to steel/timber
Knabber_BLK_2,0_E

Nibbler BLK 2.0 E

Installation Tools

For corners and edges
Betonschraube FBSR-6_3

FBS-R-6.3

Self-drilling Roof Screws

To secure roofing membranes on concrete
FPS-E+EcoTek

FPS-E/EcoTek

Concrete / Aerated Concrete Screws

To fix roofing membrane
HTV 8240 TK

HTV 82/40 TK

For combination with EJOT Dabo screws
[TKE-4_8].png

TKE-4.8

Self-drilling Roof Screws

Fastening stress plates to steel/timber
VHT-R-4,8x80-Pos2_foto2

VHT-R-4.8

Self-drilling Roof Screws

Fastening stress plates to steel/timber
Ecoset-Akku

Installation tool ECOset HTK

Installation Tools

For fixing of HTK and TKR/TKE
EJOSYST_ADJUST_Gruppe

EJOT® ADJUSTtec

Integrated variety for consistent clearances
IT-60_5-H_500

IT 60/5 H

ETICS Tools & Accessories

Insulation washer
Schubfeldscheibe-VS

VS shearing load washer

Accessories

For use with EJOT® screws JZ, JA, JT
Insulation washer IT

IT-Z 60/8 S

ETICS Tools & Accessories

Insulation washer
_EJOT_drillX_foto1

Drill extension

Installation Tools

with drive-out wedge
Delta_PT_DS_Pos2_foto2

DELTA PT® DS

Thread-cutting fastening in all thermosets as well as particularly brittle thermoplastics

Solar_adaptor_plate

SB flat steel for EJOT® Solar Fastener

Solar Fasteners

Accessory for EJOT solar fasteners

Bohrschraube Typ FD1

self-drilling screw type FD1

Window Production Screws

for reinforcement mounting
_ejotherm_VT2G_foto1

ejotherm® VT 2G

ETICS Tools & Accessories

Combi washer
Rohrmanschette_Soaker

Soaker Set

Pipe Flashings

Pipes with large openings
DMT-Art-98-Pos2-500x500

Metal insulation stress plate DMT

Insulation Support Anchor

To fasten soft and hard material
_EJOT_DDS-Z_500x500

DDS-Z

ETICS Anchors

Insulation screw for direct installation into concrete
Setzgeraet_Ecoset

Installation tool ECOset

Installation Tools

for screws up to 160 mm
JT3-2-6,0

JT3-2-6.0

Solar Fasteners

profiled aluminium sheets to steel/aluminium/wood substructure
Bohrschraube Typ FD2

self-drilling screw type FD2

Window Production Screws

for reinforcement mounting
Fensterbohrschraube Typ ATS

window screw type ATS

Window Production Screws

replacement screw
DH_zweiteilig

DH (set)

Insulation Support Anchor

consist of plate and shank
Bolzensetzgeraet_P560

Shot firing tool P 560

Direct Assembly

Fixing of cassettes
bit-kreuzschlitz-E-6,3

Cross recess bit form E 6.3

Installation Tools

External hexagon drive
JF3-2H-4-8 magaziniert

JF3-2H-4.8x19-E14 collated

Side lap stitching of profiled steel / aluminium sheets and sandwich panels
FR-Variotool

FR-variotool

Installation Tools

Fixing of corrugated and trapezoidal profiles
HTK-2G-M_foto1

HTK-2G-M collated

for all Dabo screws with bugle and head drive
Magazinstreifen-JT2-3-4_8_foto1

JT2-3-4.8x19 collated

Self-drilling Screws

profiled steel sheets to steel substrate
DH-zweiteilig

Insulation support anchor DH - 2 Piece

Insulation Support Anchor

For rear ventilated facade insulation
Fensterbohrschraube Super-E-Tg

self-drilling window screw type Super-E/Tg

Window Production Screws

screw for fittings with partial thread
Dachbohrschraube_Dabo_SW8RT_4.8

SW8-RT-4.8

Fastening stress plates to steel/timber
_ejotherm_STR_Rondelle_MW

ejotherm® STR ring washer MW

ETICS Tools & Accessories

JT3-2H-4,8_foto1

JT3-2H-4.8

Self-drilling Screws

Side lap stitching of profiled steel / aluminium sheets and sandwich panels
Fensterbauschraube Typ Super E

self-drilling window screw type Super-E

Window Production Screws

screw for fittings

Profilfuellerleisten

ISO-Profil filler strips

Accessories

Reliable and permanent sealing
_ejotherm_STR_Rondelle_EPS

ejotherm® STR ring washer EPS

ETICS Tools & Accessories

Pro-GAP09_01-500x500px

Pro GAP

Reveal beads with mesh

Self-adhesive plastic profile with glass fiber mesh, polyethylene foam tape and bendable protective flap with selfadhesive transfer tape

bit-TX-C-6,3

Bit hexalobular TX form C 6.3

Installation Tools

External hexagon drive
STR U

ejotherm® STR U

ETICS Anchors

universal screw-in anchor
STR U 2G_foto2

ejotherm® STR U 2G

ETICS Anchors

universal screw-in anchor
Fensterbohrschraube Typ S

window screw type S

Window Production Screws

screw for fittings
EJOSYST_modular_Gruppe

Modular Components

Complex components for individual solutions
EJOT_ALtracs_Plus_gerade_WN5152

ALtracs® Plus

The self-tapping screw for light metal
JT2-FZ-F-6.5

JT2-FZ-F-6.5

Self-drilling Screws

Fibre cement sheet to wooden substructure
application

Pro GAP Giga Flex slim

Reveal beads with mesh

Self-adhesive plastic profile with fiber glass mesh

Easyboss_V_rot_Pos1_foto4

EASYboss® V

The flexible standard for variable component thickness.
JT4-FZ-6,5

JT4-FZ-6.5

Self-drilling Screws

Fastening corrugated fibre cement sheets to timber substructure
JT3-18_Bild

JT3-18-5.5

Self-drilling Screws

with hardened steel drill point
ejotherm-STR-Tool-2GE_Pos 2_500x500

ejotherm® STR-tool 2GE

ETICS Tools & Accessories

assembly tool
Delta_PT_Pos1_foto3

DELTA PT®

Highly resilient direct fastening in thermoplastics, also with fibre reinforcement

produktabbildung

Anchor rod AST / threaded rod

Chemical Anchors

For polyester and vinyl ester composite mortar
_ejotherm_Sanierfraeser

ejotherm® STR renovation cutter

ETICS Tools & Accessories

Dämmstoffmetallhalter DMH

Metal insulation support anchor DMH

Insulation Support Anchor

To fasten soft and hard material
JT2-12-5.5 EJOGUARD

JT2-12-5.5 EJOGUARD

Self-drilling Screws

Profiled steel sheets to steel substructure
JT2-6-5.5 F12

JT2-6-5.5 F12

Self-drilling Screws

Profiled steel sheets to steel substructure
Bohrschraube_JT3-D-6H-5,5_6,3x127-E16

JT3-D-6H-5.5/6.3

Self-drilling Screws

Sandwich panels to steel substructure

What is ... the clamp thickness?

Hence, the clamp thickness is the threaded part of a screw minus the length of the drill point, right? Wrong! Especially with regard to the clamp thickness of self-drilling screws, there are some important points to note: 1.

Higher load values, faster processing, better performance – Through bolts BA Plus

Learn in a playful way how to install a through bolt BA Plus correctly and go through the individual installation steps.

Software

Always the optimal mounting element for every application – with the new product configurator, the correct selection is no longer a problem. In just a few steps you get all the necessary information, adapted to your building project.

EJOT® TEC ACADEMY | Training offer

Our construction experts are there for you With the EJOT TEC ACADEMY we regularly offer you various training opportunities to inform you about current trends in the construction industry as well as about our products and their applications – but also to promote a mutual exchange and to answer your questions directly. The EJOT TEC ACADEMY offers Online trainings and seminars Podcast Guidebooks in the Construction Blog YouTube Take advantage of the digital opportunities to learn more flexibly from your home office or office via our various offers and expand your specialist knowledge.

No more defects in the RVF

29.01.2025, Market Unit Construction Two serious and regularly occurring problems with rear-ventilated facades using fibre cement panels could soon be a thing of the past: no more unsightly light marks on the facade panel in the area of the substructure and no more broken panels at the fixing points.

Outstanding site development

EJOT site in Tambach-Dietharz receives "Outstanding site development" award

CAD & more

With the one-time registration we provide in this area CAD data in various formats as well as PDFs of the technical drawings of our products EVO PT®, DELTA PT®, SHEETtracs® and ALtracs® Xt. Additionally, CAD & more offers you the possibility to design your individual joints with the aid of prognosis programs or to check their feasibility by APPLICATION CHECKs.

Service Building Fasteners

Expert EJOT staff repair the defective tools to prevent down-times. If possible, we carry out the repairs directly on site. If the damage is too severe, the repair will be done in one of our EJOT workshops.

EJOWELD® Pace Award

As we joined virtually with our colleagues around the world today to watch the online presentation it became apparent of how important it is to have a dedicated team to bring forth game-changing technology.

Types of anchoring with roofing membranes – Flat Roof Guidebook Part 2

With regards to the fire load, the use of mechanical fastenings is permitted without certification according to DIN 18234, the so-called Industrial Directive, unlike with bonded structures. With mechanical fastening, the whole roof package is fastened in one work step and is therefore the most economical solution for the contractor when it comes to assembly time.

EJOT® goes digital

The Corona pandemic has undoubtedly given this development an enormous boost, also at EJOT. From one day to the next, customer seminars as face-to-face events were no longer possible and alternative formats had to be developed at short notice in order to keep customers up to date on topics related to fastening technology.

Façade greening of the ENNI administration building with CROSSFIX®

With an area measuring 600 square metres, the east façade is the largest vertical garden in Germany to date (as of May 2022).

What is an anchor pull-out test for? – ETICS: Focus on service Part 1

ETICS: FOCUS ON SERVICE Read also the other parts of the series and learn more about our 360° service on the topic of ETIC systems. Part 2 – What must be taken into account with reveal beads with mesh? Part 3 – Why do I need a preliminary design? Part 4 – How do I determine the right anchor? Part 5 – How do I determine the right mounting element?

KERI-system

A complete system for renovation The KERI system Advantages of the KERI system Excellent rated values for transverse and flexural strength due to the structural shape of the anchor for a small minimum number of anchors No temperature restrictions in installation, as it is a purely mechanical system – without mortar Long-term safety and longevity, no signs of fatigue due to the exclusive use of stainless steel components Fire behaviour according to building material category A1 "non-combustible", as without flammable components Processing: only one drilling diamete ...

EJOT® TEC ACADEMY

EJOT also offers a variety of videos on YouTube with product presentations, installation instructions and tips from the world of fastening technology.

FDS®

Additional processing steps such as pre-drilling, stamping or thread-cutting are no longer necessary. Thanks to the increased thread engagement of the FDS® screw in the formed extrusion, a high-strength screw joint without any chips is created.

EJOT anniversary page

With the charity events EJOT would like to get involved with projects at the different locations that are from the charitable area or that are related to environmental protection and nature conservation.

EJOT Sliding point screw VARIO

The advantages at a glance One screw for all part combinations Consistently low contact pressure prevents stick-slip phenomenon No stripping/destruction of the thread in component II resulting in high tensile capacity High self-locking/clamping effect of the thread in component II due to reduced drill point diameter No loosening of the screw under long-term stress High tensile and transverse load transmission in the substructure due to fine pitch thread General building authorities test certificate as proof of usability according to DIN 18516-1 Wall brackets made of stainless steel and aluminium are pa ...

360° Service for ETICS

On-site service Construction site advice Anchor pull-out tests Endoscopy for assessing double-sheet wall structures Adhesive tests for EJOT reveal beads with mesh Individual consultation Product training and instruction Classification of the required assembly elements Pre-dimensioning for safety-relevant assembly elements Pre-dimensioning for double expansion renovation anchors Contact Personal sales and application engineering contact

EJOT® JC2 Plus concrete screws with optimized thread geometry

The advantages of the concrete screw JC2 Plus at a glance Very easy and quick installation Immediate load-bearing capacity (no curing times) Virtually no expansion forces No special tools required Ideal for fixings close to the edge Removable Applications Facade scaffolds Temporary fixings Supports Shelves Cable racks Hand rails Battens Shuttering

Ecological facade design with the Iso-Bar ECO

Iso-Bar ECO The approved fastener for greening ETICS facades When fastening greening systems to facades with thermal insulation (ETICS) the focus is not only on a safe installation of the greening system, but especially on a fastening in the substrate that is optimised for thermal bridges, as well as sealing to protect against moisture penetration.

Countersunk installation with ejotherm® STR U 2G

In order to avoid frequently occurring light or dark spots on ETICS facades, also known as "anchor marks", EJOT developed the countersunk anchor installation with a cap – the so-called STR principle.

EJOWELD®

This innovation offers the possibility of joining multi-material designs, in particular lightweight materials and ultra-high strength steels, with a friction welding fastener setting tool suitable for robot integration.

Sustainability

The first sustainability report for our group of companies shows many of the activities we have initiated to reduce our CO2 emissions - with the aim of achieving climate neutrality by 2035.

EJOT TEC CENTER – Ecological and sustainable

"In terms of construction, we are moving with the times," emphasised architect Prof.

ALtra CALC®

With the development of the ALtra CALC® prognosis program the industry leader EJOT has addressed this problem in order to offer an optimum design aid to the customer.

New dimensions for the product range: Fastening solar systems with reduced swarf

14.03.2024, Market Unit Construction Securely application on the surface, no tripping or slipping off, no sharp-edged swarf and yet a high assembly speed. The established EJOFAST® self-drilling screws by EJOT convince with these features. The EJOFAST® product range has been expanded with self-drilling screws with a diameter of 6.0 mm.

CROSSFIX wins German Innovation Award 2021

Downloads Press release German Innovation Award 2021 [PDF; 209 KB] Picture German Innovation Award 2021 [PNG; 630 KB]

Environment | Supplier

Collaborative partnerships with suppliers

Industrial Division

Register for our customer service area "CAD & more". With the one-time registration we provide you CAD data, the prognosis program DELTA CALC® and ALtra CALC® for predesigning joints in thermoplastics and light metals and much more.

Industrial Division

Register for our customer service area "CAD & more". With the one-time registration we provide you CAD data, the prognosis program DELTA CALC® and ALtra CALC® for predesigning joints in thermoplastics and light metals and much more.

Software

Download the desired software to your PC free of charge or find the right product for the respective application of your construction project online with the help of the configurator.

Fastening with reduced swarf in the field of air conditioning/ventilation technology EJOFAST® self-drilling screws

The EJOFAST® family for various applications in air conditioning and ventilation The drill tip of the EJOFAST® self-drilling screws produces no sharp-edged swarf that gets stuck in the material. This enables the fitters to work much more efficiently, as cleaning work to remove swarf, e.g. in the ventilation ducts, is significantly reduced. Get to know our specific fastening solutions from the EJOFAST® family and learn more about the respective features and advantages.

Our objectives and projects

Sustainably produced electricity will be marketed regionally. No one is excluded and everyone can make their contribution to the energy transition.

Avoid assembly errors with self-drilling screws – Self-drilling screws Guidebook Part 5

If the screw with the sealing washer has not been tightened enough, it is too loose (a) and tightness cannot be guaranteed.

Presentation

EJOT - that's more than 4,000 employees in 51 locations with more than one hundred years of company history.

Reveal beads with mesh

Reveal bead with mesh EJOT® Pro GAP Giga Flex slim – 7 mm Small construction width (7 mm) and wide range of applications with high movement absorption at the same time: GAP07 Giga Flex slim is optimal for areas with limited space, e.g. renovations.

Industrial Division Services

EJOT Tec Days: On-site customer training with compact knowledge on fastening technologies.

Industrial Division Services

EJOT Tec Days: On-site customer training with compact knowledge on fastening technologies.

Students

You are planning to write your thesis? Bachelor's, Master's or diploma: Write your thesis with us at the nexus of theory and practice and establish significant ties for the start of your career. We support you in your academic thesis with our expert knowledge and assist you personally and technically throughout the whole time.

Anchoring with through bolts and injection systems – Rainscreen Facades Guidebook Part 5

Excessive torque can cause the substrate to split or the anchor to fracture. It is therefore particularly important to activate the anchors with the predetermined torque using a torque wrench.

Solar park in Chernobyl makes irradiated areas usable

Even 35 years after the Chernobyl disaster, the areas within the 10 km zone around the damaged reactor block 4 are not usable for humans.

The anchor primer – facade anchors for timber and metal attachments

Fastening thickness of the attachment The fastening thickness contains the thickness of the attachment and the exterior plaster (non-supporting layer). Example: With a 100 mm-long anchor which is embedded 70 mm in the substrate, a fastening thickness of up to 30 mm can be achieved.

be you | be part - EJOT as an employer

WORKING AT EJOT - A FUTURE THAT PAYS We want you to come to EJOT to stay. This also includes your being able to make your individual wishes for your personal and professional life with us a reality.

Specialist in fastening technology

Want to expand your expert knowledge of fastening technology?

EJOT® participates in the bauTage event 2021

EJOT is part of the event with an expert lecture on the subject of "CROSSFIX® – the modern, rear-ventilated facade", and provides information about the innovative substructure system for the rear-ventilated facade (VHF) at a digital stand.

EJOT® Iso-Bar ECO wins the DETAIL Product Award 2021

In cooperation with archipinion, the renowned architecture magazine DETAIL awards this prize annually to the most innovative building products, systems and materials.

EJOT project TREEATHLON® – They are planting the forest of the future here

After just three hours, the EJOT logo at the northern edge of the reforestation area had already been planted with 800 red oaks. More than 50 trainees and students put in a lot of hard work. A few days earlier, the trainees with support from Helmut Zacharias, head of the learning workshop at the Herrenwiese site, had marked out the planting area for the logo together with employees of the Rentkammer.

Scope 3 – The challenging step towards decarbonisation

For example, a workshop was held with eleven suppliers from the entire supply chain to develop ways to reduce CO2e.

How do I determine the right mounting element? – ETICS: Focus on service – Part 5

A wide range of attachments can be selected in the central selection area. If these cannot be clearly assigned, a calculation can be made based on the weight or the distinction between safety-relevant and non-safety-relevant attachments.

How do I determine the right anchor? – ETICS: Focus on service – Part 4

ETICS: FOCUS ON SERVICE Read also the other parts of the series and learn more about our 360° service on the topic of ETIC systems.

CAE-Services

The EJOT CAE services include a wide range of engineering services, from considering individual screw joints to analysing complete assemblies. We offer customized calculation services so that you can reliably assess the behaviour of your components with our fastening systems already during the development phase. With the help of many years of know-how in fastening technology, modern simulation tools and high-quality material models, we are able to cover a wide range of questions.

Ceremonial opening of the TEC CENTER

The new TEC CENTER of the EJOT group in Bad Laasphe is a place for technical progress and transfer of knowledge.

Anchor function principles – Heavy-duty anchor Guidebook Part 3

The ETA-controlled setting tool ensures the correct distance. Advantages: Easy assembly (no setting tools, exception: drop-in anchors) Immediate load-carrying capacity (no curing times) Self-locking load bearing capacity: As soon as load is introduced via the add-on part, the cone bolt continues to pull into the sleeve. It continues to expand. (Exception drop-in anchor) Safety bolt with double cone for higher load bearing capacity Note: Anchors with a large expansion require higher minimum centre and edge distances Expansion anchors are not removable Expansion anchors are only ...

The colourful world of fasteners

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail: construction@ejot.com

What must be taken into account with reveal beads with mesh? – ETICS: Focus on service Part 2

ETICS: FOCUS ON SERVICE Read also the other parts of the series and learn more about our 360° service on the topic of ETIC systems. Part 1 – What is an anchor pull-out test for? Part 3 – Why do I need a preliminary design? Part 4 – How do I determine the right anchor? Part 5 – How do I determine the right mounting element?

Volkswagen Group's ‘Formel Q Certificate’ for the EJOT Herrenwiese/Bienhecke site

This was preceded by a three-day audit, 92 percent of the requirements of which were met, as Friedbert Müller, Quality Manager at the Herrenwiese site, explains. The process audit is carried out according to the Association of the Automotive Industry (VDA-QMC).

Sustainable cladding of aesthetic facades with CROSSFIX®

13.01.2021, Construction Division EJOT is revolutionizing rear-ventilated facade construction with the CROSSFIX® substructure system.

Types of screws – Self-drilling screws Guidebook Part 1

GUIDE TO SELF-DRILLING SCREWS Also read further articles of the self-drilling screws guide. Part 2 – Head styles and types of drives Part 3 – Production of self-drilling screws Part 4 – Edge distances Part 5 – Avoid assembly errors with self-drilling screws

EJOWELD

The joining technology EJOWELD®, developed by the fastening specialist EJOT, is an innovative solution to join different materials and semi-finished parts. This innovation offers the possibility to join multi-material-designs, especially lightweight materials such as aluminum and advanced high-strength steel, with a friction element setting tool which is suitable for robots. Besides the technology, the business unit EJOWELD® also provides the development and production of friction welding elements as well as the full equipment and service.

Fastening with reduced swarf on the facade | EJOFAST® screws

The EJOFAST® family for various applications on the facade The self-drilling screws of the EJOFAST® family allow secure application to the surface. Dancing or slipping is almost impossible – an important feature when it comes to fastenings on the facade. Get to know our specific fastening solutions from the EJOFAST® family and learn more about the respective features and advantages.

EJOT® Pro-Line profiles expand product portfolio

The products ensure the exact formation of plaster connections in ETIC systems. New technology enables optimum movement absorption The two reveal beads with mesh EJOT Pro GAP Active Flex and Giga Flex are in the focus of the new product range.

Sandwich fastening directly into concrete

With the new ETA-certified JC6-D concrete screw from EJOT, sandwich panels used for industrial lightweight construction can now be fastened directly to precast concrete substructures.

Mounting through bolts – How to avoid installation faults

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail. construction@ejot.com

Success story – C2-approved fixings for regions with seismic activities

The reinforcement elements need to be mounted with anchors with seismic approval, such as the EJOT BA-E Plus.

Fastening with reduced swarf on the roof | EJOFAST®self-drilling screws

At the same time, the drill tip of the EJOFAST® self-drilling screws does not produce any sharp-edged swarf that gets stuck in the material. This enables the fitters to work much more efficiently, as the amount of cleaning work to remove swarf on the roof is significantly reduced. Get to know our specific fastening solutions from the EJOFAST® family and learn more about the respective features and advantages.

EJOT® JC2 concrete screws – Additional embedment depths and approved reusage

An additional, reduced embedment depth of 35 mm is now possible for multiple fastening of non-load-bearing systems in concrete (ETA 18/0221) using the JC2 concrete screws with a diameter of 6 mm and hexagon head (KB), truss head (FR) or countersunk head (ST).

System Performance

Improving System Performance with EJOTFor increased efficiency in the overall process Fasteners are small parts with an overall big effect.

Conventional or innovative? Which is the best self-drilling screw? – Solar Guidebook Part 5

If required, the JF3-2-6.0 is also available as a multi-certified version with a slightly larger diameter. However, the EJOFAST® range of self-drilling screws offers another major benefit compared to most other conventional self-drilling screws available on the market.

Types of corrosion – Corrosion Guidebook Part 1

Upon contact with oxygen, these form a thin oxide film - so-called passive coating - on the surface, which actually protects against further corrosion.

Technical rules for flat roofs – Flat Roof Guidebook Part 6

With regard to the number of fasteners to be used, the statements in the rules and regulations are to an extent not entirely uniform.

Fastening with reduced swarf for solar installations | EJOFAST® self-drilling screws

The EJOFAST® family for various applications in solar installations The self-drilling screws of the EJOFAST® family allow secure application to the surface. Displacement or slipping is almost impossible – an important feature in the fastening for solar installations. The high assembly speed and the high load-carrying capacity of the EJOFAST® screws are of great advantage in this range of applications and increase the security of the fastening. Get to know our specific fastening solutions from the EJOFAST® family and learn more about the respective features and advantages.

Apollo Nivy – Sustainable office building in Slovakian capital

Moreover, EJOT operates with close collaboration across borders, as customer support and engagement with planners and architects were handled by EJOT SLOVAKIA, with support from EJOT colleagues in Austria and Croatia during the project planning phase.

Correctly inserting plastic facade anchors – Rainscreen Facades Guidebook Part 4

As a fastening specialist, EJOT offers a variety of fastening solutions for rainscreen facades and ensures, that all system components are securely connected to one another.

Service

Do you have questions about our products or need technical advice? Please feel free to use our contact options.

Solar and photovoltaic systems on the roof

For applications on corrugated fibre cement sheets, we recommend the set with an FDZ fibre cement seal.

Corrosion protection – Corrosion Guidebook Part 2

Note on the combination of different raw materials When combining corrosion resistant raw materials, we must pay special attention to the Bimetallic corrosion, as not all raw materials are compatible with each other.

Reduced swarf fastening | EJOFAST® self-drilling screws

YOU ARE INTERESTED IN THE PRODUCTS OF THE EJOFAST® FAMILY? You are welcome to write us a mail. construction@ejot.com

Planning basics – Flat Roof Guidebook Part 1

They are therefore called impervious to rain. The minimum roof pitch of roofs with roof covering is known as the standard roof pitch and ultimately depends on the materials used.

Senior Professionals

You are a master in your field? You do not want to wait for the future anymore, but rather participate in shaping it?

EJOT ANCHOR FIX®

Fields marked with * (asterisk) are mandatory fields and must be filled in. Please note the information on the processing of your personal data in our privacy policy.

Next generation of concrete screws for higher load-bearing capacity

By doing so, the thread cuts into the concrete, creating a mechanical interlock within the total embedment depth. During installation, there are almost no expansion forces, which is beneficial for temporary fixings close to the edge.

New to the product range: EJOFAST® JF3-Plus selfdrilling screws

About EJOT® With the Market Unit Construction, the fastening technology specialist EJOT caters to selected segments of the building industry.

EJOT withdraws from business in Russia

After a lengthy review, the management of the EJOT Group, in consultation with the Advisory Board, has decided to withdraw from the Russian business. In view of the great suffering and the unbelievable destruction caused by the Russian aggressors in Ukraine, there will be no economic "business as usual" in the near future.

Corrosion – Heavy-duty anchor Guidebook Part 5

Subscribe to our newsletter to always receive the newest articles from our heavy-duty anchor guide.

Corporate Carbon Footprint

The first sustainability report for our group of companies shows many of the activities we have initiated to reduce our CO2 emissions - with the aim of achieving climate neutrality by 2035.

Cracked concrete – Heavy-duty anchor Guidebook Part 2

The new heavy-duty anchor guide now gives you useful tips and information on all aspects of anchoring technology on a regular basis.

Why do I need a preliminary design? – ETICS: Focus on service Part 3

ETICS: FOCUS ON SERVICE Read also the other parts of the series and learn more about our 360° service on the topic of ETIC systems.

EJOT® TEC ACADEMY Podcast

Knowledge for on the go In our EJOT podcast series, you can find out more about current trends and topics in the construction industry and the associated fastening solutions – always up-to-date, technically sound and at the heart of the industry. You can integrate our expert knowledge directly into your everyday work and make your projects a success! Episode 5: Anchoring technology It is a real all-rounder for anchoring metal and wooden constructions in concrete.

New version of the free pre-dimensioning software EJOT ANCHOR FIX®

Once installed, the software updates itself automatically, and of course free of charge, on the end device. Features of the latest version The tool is now even more intuitive to use.

Young Professionals

You successfully completed your studies or your vocational training and would now like to put your knowledge into practice?

EJOT Micro Screws

Representative for many other sectors is the industry of mobile means of communication, for example smart phones, where every gram and every millimetre which can be saved counts for competitive advantage. It is now possible to produce a DELTA PT® screw for direct assembly in thermoplastics, designed as a micro screw, with a nominal diametre of 1 mm.

SHEETtracs®

The original for reliable thin sheet metal joints with pilot hole Less material = less costs.

ArcelorMittal, Finkernagel, EJOT - how a sustainability chain works

At Finkernagel's headquarters in Altena, North Rhine-Westphalia, the three companies have now made the cooperation public.

EJOCLEAN®

Since function-critical vehicle components are having to fulfil cleanliness specifications with increasing regularity, project planning departments have been focussing on the concept of "technical cleanliness" for some time now.

EJOT® self-tapping screw JZ5 – Use at maximum drilling capacity

The advantages of the JZ5 at a glance Higher strength of the material – the harder steel tip of the 2 component self-tapping screw can also penetrate harder materials and thus form a thread significantly better in high-strength steel constructions Replacement of screws with a smaller diameter, e.g. during renovation Reliable watertight sealing through ethylene propylene-diene rubber The JZ5-6.3 is ideally suited for applications with little space where a drill point cannot be used (e.g. HTU rails) Specifications A2 stainless steel with hardened thread-forming zone Sealing washer made of zinc-plated steel or stainless steel with ...