Press release

No more defects in the RVF

Two serious and regularly occurring problems with rear-ventilated facades using fibre cement panels could soon be a thing of the past.

Volkswagen Group's ‘Formel Q Certificate’ for the EJOT Herrenwiese/Bienhecke site

Requirements fulfilled at 92 percent (A rating)

Innovative solutions for direct fastening into metals and high-strength sheet materials

At EuroBLECH in Hanover, EJOT will present innovative solutions for direct fastening into metals and high-strength sheet materials.

Scope 3 – The challenging step towards decarbonisation

The path to climate neutrality leads through Scope 3 emissions.

TOP 100-Award - Ranga Yogeshwar honors EJOT for innovation performances

Ranga Yogeshwar, a well-known science journalist, congratulates the EJOT SE & Co. KG from Bad Berleburg for being awarded with the TOP 100-seal

Successful climate protection project of the EJOT Group

Employees, the environment and the company benefit

New dimensions for the product range: Fastening solar systems with reduced swarf

The EJOFAST® product range has been expanded with self-drilling screws with a diameter of 6.0 mm. The JF3-2-6.0 is especially used in the solar industry such as for elevated solar substructures on trapezoidal profiles using short rail system.

Ceremonial opening of the TEC CENTER

The new TEC CENTER of the EJOT group in Bad Laasphe is a place for technical progress and transfer of knowledge.

EJOT Group focuses on North American market

Strategic realignment with the establishment of a new joint venture. With the implementation of the future concept "EJOT 2025", the EJOT Group will focus more strongly on international markets outside Europe.

EJOT – much more than "just" screws

For the electromobility sector, EJOT is presenting a portfolio of tailor-made components at FAKUMA that do not only just "fasten". The presence at the trade fair also includes the presentation of a newly developed screw drive, the TOBI® Drive System.

EJOT für familien- und lebensphasenbewusste Personalpolitik ausgezeichnet

Bundesfamilienministerin übergibt Zertifikat an Bad Berleburger Familienunternehmen.

ArcelorMittal, Finkernagel, EJOT - how a sustainability chain works

The cooperation between ArcelorMittal, Finkernagel and Ejot is a good example and a premiere for a cooperation between manufacturer, processor and end-product producer to reduce environmental impact.

EJOT® product innovation wins German Innovation Award 2023

The basic baseboard profile Pro BSOP-HL and the basebead profile Pro SOP for the design of recessed building bases on the external thermal insulation composite system (ETICS) have won the German Innovation Award 2023.

EJOT SE & Co. KG receives TOP 100 seal

The family-owned company with its headquarter in Bad Berleburg has convinced with its innovation qualities in a scientific selection process and receives the seal "TOP 100".

New version of the free pre-dimensioning software EJOT ANCHOR FIX®

EJOT ANCHOR FIX® is a simple, efficient and free dimensioning program for heavy duty anchorages. It's constantly being improved and updated to meet market and user requirements.

Kuehne + Nagel, EJOT and Kreisbahn send pilot transport from the South Westphalia container terminal on its way

36 pallets with 19,000 kilograms of finished goods from EJOT have now been transported from the South Westphalia container terminal to Austria by rail on two swap bodies.

EJOT TEC CENTER – Ecological and sustainable

The EJOT Group invests 10 million euros in new TecCenter in Bad Laasphe. Ecology and efficiency play a central role.

EJOT project TREEATHLON® – They are planting the forest of the future here

Tree planting event for employees from Wittgenstein

EJOT® JC2 concrete screws – Additional embedment depths and approved reusage

The EJOT concrete screws from the JC2 family have long proven their true versatility. With the ETA revision and a new national approval, the possible applications of the products have been considerably expanded.

Success story – C2-approved fixings for regions with seismic activities

BA-E Plus A4 through bolts are used to fix the reinforcement elements onto concrete slabs ceiling for improved seismic performance.

EJOT withdraws from business in Russia

After a lengthy review, the management of the EJOT Group, in consultation with the Advisory Board, has decided to withdraw from the Russian business.

"Bringing it together" - EJOT song for the anniversary now also as music video

Since the beginning of January, the EJOT song "Bringing it together", composed and produced by the band Billenial Collective for the 100th anniversary of the EJOT Group, has been running up and down.

EJOT® Iso-Bar ECO wins German Innovation Award 2022

The fastening element for the subsequent and thus flexible fastening of green facades on heat-insulated facades recently received the German Innovation Award 2022 in Gold in the category "Excellence in Business to Business – Building & Elements".

FM approval for EJOT flat roof products – Certification for worldwide use

A wide range of EJOT flat roof fasteners has been tested and approved for use by the American FM Approvals testing institute in combination with various types of roofing membranes.

Mechanically fastened roof waterproofing systems – Updated and optimised ETA 07/0013 now available!

An updated and fundamentally optimised version of ETA 07/0013 for mechanically fastened roof waterproofing systems is now available.

Concrete screw JC2 Plus 14 – DIBt-approved for reusage into concrete

The ETA-approved JC2 Plus concrete screw for high loads is DIBt-approved for reusability together with the CG Checking Gauge.

New to the product range: EJOFAST® JF3-Plus selfdrilling screws

The new EJOFAST® JF3-Plus adds a powerful product to the proven EJOFAST® self-drilling screw range from EJOT. The new, ETA-certified self-drilling screw has significantly improved load-bearing capacity in timber.

New machinery and real estate – EJOT® is investing heavily in Finland

Trust in the Finnish manufacturing industry is high at the EJOT group, headquartered in Germany, as it is investing heavily in its Finnish organization, EJOT Sormat Oy.

Change of corporate form to EJOT SE & Co. KG

With the transformation into a European public limited company we place greater emphasis on the ongoing internationalisation and raise this to an even more professional level in operational terms.

EJOT® Iso-Bar ECO wins the DETAIL Product Award 2021

For the second year in a row, EJOT won the race for one of the coveted DETAIL Product Awards. Iso-Bar ECO won the "Facade" category.

ejotherm® screw-in anchor S1 short – The all-rounder for thin insulation boards

The ejotherm® screw-in anchor S1 short is suitable for all thin insulation materials, such as high-performance, soffit and ceiling insulation boards, and enables flush surface installation in all substrates.

EJOT® goes digital

Online training offers of the Construction and Industrial Division

Next generation of concrete screws for higher load-bearing capacity

With the JC2 Plus, the established concrete screw JC2 got an even more powerful successor. The load-bearing capacity values in cracked and non-cracked concrete have been significantly increased compared to the predecessor.

CROSSFIX wins German Innovation Award 2021

The CROSSFIX® substructure system for rear ventilated facade constructions by EJOT was recently awarded with the German Innovation Award.

Sustainable cladding of aesthetic facades with CROSSFIX®

EJOT is revolutionizing rear-ventilated facade construction with the CROSSFIX® substructure system.

EJOT® wins DETAIL Product Award 2020

EJOT was able to prevail in the vote for the DETAIL Product Award 2020 for the CROSSFIX® substructure system for the rear-ventilated facade and thus win the coveted award.

EJOT® participates in the bauTage event 2021

The bauTage event 2021 will take place from January 11-18, 2021. EJOT is part of the event with an expert lecture on the subject of "CROSSFIX® – the modern, rear-ventilated facade" and a digital stand.

EJOT® at ARCHITECT@WORK in Berlin

At this year's ARCHITECT@WORK in Berlin on 7 and 8 October 2020, a wide range of expert visitors gathered information about the innovations from numerous exhibitors. The focus was on CROSSFIX®.

EJOT® Pro-Line profiles expand product portfolio

With the new Pro-Line profiles, EJOT is introducing a comprehensive product portfolio for connection and plastering profiles which includes high-quality product solutions for different application areas.

EJOT® TEC ACADEMY

The TEC ACADEMY offers EJOT customers and partners the opportunity to inform themselves about current topics and trends in the construction industry as well as about various EJOT products and their applications.

CROSSFIX® – The stainless steel substructure system

CROSSFIX® is the first stainless steel substructure that can be used for horizontal and vertical support profiles. CROSSFIX® increases your flexibility, facilitates assembly, ...

Outstanding site development

EJOWELD® Pace Award

EJOT Fastening Systems LP was named a 2020 Automotive News PACE Award winner at an awards ceremony on April 28.

EJOT Micro Screws

 Maximum performance in minimal installation space. 

Cell PT®

The thread-coining screw for microcellular foamed thermoplastics. 

SHEETtracs®

The original for reliable thin sheet metal joints with pilot hole. 

FDS®

The flow-drill screw for high-strength joints in sheet metals. 

EJOWELD®

Innovative joining technology for the automotive hybrid and lightweight construction. 

EJOFORM®

Flexibility and cost reduction with multi-stage forming at EJOT. 

EVO PT®

The evolution of direct fastening into plastics. 

ALtra CALC®

Engineering support for direct fastening in light metal.

ALtracs® Plus

The selftapping fastener for light alloys.

DELTA PT®

Predictable direct assembly in plastic materials. 

EJOCLEAN®

Technically clean fasteners from EJOT.