EJOT Fastening Systems earned an Automotive News PACE Award following an extensive review by an independent panel of judges including a comprehensive written application and a site visit. For complete details of the Automotive News PACE Award, visit www.autonews.com/pace.
Contact: For a first topic coordination, please write us an email with your problem description: dkorn@ejot.com You can also contact us by phone: +49 2751 529 - 2088 If it is a more complex task, we would be happy to arrange a conference call or an on-site visit.
EJOT site in Tambach-Dietharz receives "Outstanding site development" award
EJOT Fastening Systems earned an Automotive News PACE Award following an extensive review by an independent panel of judges including a comprehensive written application and a site visit... More: https://www.ejot.com/presse-ejoweld-award
Volkswagen Group's ‘Formel Q Certificate’ for the EJOT Herrenwiese/Bienhecke site
At your side with advice and action
On-site service Construction site advice Anchor pull-out tests Endoscopy for assessing double-sheet wall structures Adhesive tests for EJOT reveal beads with mesh Individual consultation Product training and instruction Classification of the required assembly elements Pre-dimensioning for safety-relevant assembly elements Pre-dimensioning for double expansion renovation anchors Contact Personal sales and application engineering contact
On-site service Individual consultation Logistics Digital services
EJOT is a medium sized group of companies specialising in advanced fastening technology.
The effect of these variations can be simulated with the program within realistic boundaries. With an integrated material data bank, a selection of many different light metal alloys is available for the calculation of the joint.
If the fastening base on the structure is not covered by the ETA or if it cannot be determined clearly or at all, on-site tests, so-called anchor pull-out tests, are required.
EJOT is engineering and development partner: Design engineering support and on-site advice World-wide availability, just in time delivery Process reliable assembly and high degrees of purity 0 ppm target and highest possible quality With EJOT, the costs of the complete system can be reduced and system performance increased.
The possibility of cutting to length on site to suit the insulation thickness enables the realisation of a lean product range. The Iso-Bar ECO is available in four lengths and thus ensures a completely flexible usage on-site. Detailed information about Iso-Bar ECO can also be found at www.ejot.com/iso-bar-eco.
The EJOT Group invests 10 million euros in new TEC CENTER in Bad Laasphe Ecology and efficiency play a central role when it comes to the new TEC CENTER at the EJOT site in Bad Laasphe. They underline the strategic goal of the family-owned company.
Please contact the subsidiary of your country, if there are any online training courses or seminars on site available. Select your country
The new building at the EJOT Turkey site will directly reach this quota with a 2,000 kWp PV system.
More and more builders opt for an architecturally sophisticated design of production sites, sales halls or high rack warehouses.
Portrait Year of construction of the property: 2020/2021 Size of the greening: - East façade + inner courtyard: approx. 600 m² - Foyer: approx. 60 m² Owner: ENNI Energie & Umwelt Niederrhein GmbH, 47441 Moers Planning: Carpus + Partner AG, 52074 Aachen Green planning: GDL Belke GmbH, 57368 Lennestadt
Part 1 – Planning basics Part 3 – Basic concepts of initial sizing Part 4 – The wind uplift test Part 5 – Calculation of wind load Part 6 – Technical rules for flat roofs
Variable cutting directly on the construction site enables a small number of variants and perfect adaptation to local conditions, e.g. different system designs.
This includes cross-trade advice as well as comprehensive on-site service. EJOT is thus competently positioned for a wide variety of ETICS applications.
In addition, no special tools are required. A glance at the construction site reveals another major advantage of the centring sleeves used in the LT-TD system: the sleeves used in the LT system have a permanent functional purpose and remain in the drill hole.
EJOT Tec Days: On-site customer training with compact knowledge on fastening technologies.
EJOT Tec Days: On-site customer training with compact knowledge on fastening technologies.
Fact sheet Scheduled completion: 2023 Size: - 8 floors - Single floor area: approx. 8.000 m² - Office space: approx. 48.000 m² - Commercial space: approx. 3.700 m² Owner: HB Reavis, Bratislava Architect: Make Architects, London Planning: HB Reavis, Bratislava
The goal: areas contaminated by the Chernobyl nuclear disaster should be made usable again and brought back to life. After more than four years of planning, the time had finally come.
We can see the consequences in the German low mountain ranges, for example, with the destruction of spruce stands by the bark beetle. The message is powerful.
A few days earlier, the trainees with support from Helmut Zacharias, head of the learning workshop at the Herrenwiese site, had marked out the planting area for the logo together with employees of the Rentkammer.
Let yourself be surprised by our new approach to presenting EJOT's products and services. We are looking forward to your visit!
Choosing the right reveal bead with mesh profile Depending on the size and installation situation of the window, the movement to be absorbed by the reveal beads with mesh profile used can vary and result in different product requirements.
The guitar sound begins quietly. The camera reaches the band, which starts with the throbbing "Heartbeat pounds since 1922".
If the sealing washer is correctly installed, the sealing rubber may protrude from the side (d). The joint is definitely too tight only if the metal back of the sealing washer changes from convex to concave.
Machining production In the case of machining (thread cutting), the blank is shaped by milling. The thread is also made this way. The main disadvantage here is the strength of the screws. Machining the blank destroys the grain flow of the raw material, which reduces the load-bearing capacity of the screw.
Sand-lime bricks Due to their high gross density and accuracy to size, sand-lime bricks are often used as brick siding.
But which influencing factors play a role in the quantitative analysis, and which parameters are required to create the initial sizing? Influencing factors for initial sizing With regards to the effects, three factors have an influence on the calculation: The wind zone in which the building project is planned.
For the generation and transport of energy, the solar collectors use a heat transport medium consisting of a water and antifreeze mixture that circulates continuously between the collector and the buffer storage tank. This medium is heated by solar radiation. Through a heat exchanger, the medium can now heat the required water for direct use or for the heating in the buffer storage tank. The currently most common collectors are flat-plate collectors and tube collectors.
However, the tensile strength is very low, so that small cracks develop already with low tensile stress. Now, to understand which side of a ceiling is the torn side and which is the non-torn side, we can imagine a simple, thin board that crosses a stream as a footbridge.
In addition, we have negotiated contractual buy-back arrangements which should enable us to re-enter the market in the event of a fundamental change in Russian policy.
To ensure that all applicants have the same chances, the seal is awarded in three size categories: Up to 50, 51 - 200 and more than 200 employees. In the anniversary year of TOP 100 - the innovation competition currently takes place for the 30th time - interest was particularly high: 550 small and medium-sized companies applied. 300 of them were successful and received the TOP 100 seal. A maximum of 100 companies per size category can be awarded.
The JC2 Plus is designed for very heavy loads and the performance is on a top level. The size 14 SW24 is especially designed for attaching formwork supports. Features of the JC2 Plus: Two approved setting depths ETA for cracked and non-cracked concrete High load capacity Optimized thread design for improved cutting performance Optimized top shape facilitates installation Made in Finland The full range of JC2 Plus contains size 8, 10 and 14. The JC2 contains size 6.
Due to an optimised tip geometry, the new JC2 Plus is still easy to install. With two embedment depths per size, the JC2 Plus also offers more flexibility for demanding applications (covered by ETA-21/0020). With the newly launched size 14 mm, the portfolio has been expanded at the same time.
But you can find products in the navigation on the left side or you contact the following address EJOT Construction Fastening Systems Inc. 6599 Kitimat Rd., Unit No. 2 Mississauga, Ontario L5N 4J4, Canada phone: +1 226-499-9977 e-mail: infoca@ejot.com
Our interested parties Our employees, customers, suppliers and also the state and society rank among the most important interested parties.
As a drive, the hexagon head has the great advantage that the surfaces of the head realize greater power transmission and the screw can be gripped from all sides. A little more space is required at the screw-in point for the use of a hexagon nut socket.
The award ceremony took place on Friday 28th July 2024 in Weimar for all medium-sized enterprises in Germany that received the TOP 100-seal at the beginning of the year.
These different materials must be connected in a long-lasting and reliable way and of course able to withstand high loads. In addition to one-sided accessibility, the removability of the fastener is also very important, especially with regard to recyclability.
Your advantages at a glance Fastening with reduced swarf Reduced cleaning effort High installation security Thanks to proven free spin zone (for side lap screws) High installation speed Thanks to special thread form High load-carrying capacity For more safety Skid-free application Thanks to unique screw point geometry, thus no damage to the surface
With the dimensioning software for through bolts EJOT offers a very helpful tool for static initial sizing of building projects.
Part 1 – Planning basics Part 2 – Types of anchoring with roofing membranes Part 3 – Basic concepts of initial sizing Part 4 – The wind uplift test Part 6 – Technical rules for flat roofs
Part 1 – Planning basics Part 2 – Types of anchoring with roofing membranes Part 3 – Basic concepts of initial sizing Part 4 – The wind uplift test Part 5 – Calculation of wind load
Part 1 – Planning basics Part 2 – Types of anchoring with roofing membranes Part 3 – Basic concepts of initial sizing Part 5 – Calculation of wind load Part 6 – Technical rules for flat roofs
Part 2 – Types of anchoring with roofing membranes Part 3 – Basic concepts of initial sizing Part 4 – The wind uplift test Part 5 – Calculation of wind load Part 6 – Technical rules for flat roofs
Due to an optimized tip geometry, the new JC2 Plus is still easy to install. With the newly launched size 14 mm, the portfolio has been expanded at the same time.
This section minimizes stripping of the sheet metal, which can mean a loss of load-carrying capacity. In addition, it offers turning-back protection, which prevents unintentional loosening of the screw and a loss of tightness of the roof.
The help section on the right-hand side of the configurator contains useful additional information that you will require to make your entries.
The EJOFAST® JF2-2H-4.8 is a side lap screw for the connection of cassette wall systems.
The table of contents accompanies you through the menu while using the configurator and enables you to jump back to pages that have already been filled out, e.g. to change the entered data.
With the dimensioning software for through bolts EJOT offers a very helpful tool for static initial sizing of building projects.
The EJOFAST® JF2-2H-4.8 is a side lap screw for profiled metal sheets in areas that are not exposed to the weather.
Our services also include preparing an initial sizing for you.
Ich gratuliere den zertifizierten Betrieben: Sie machen mit Ihrem erfolgreichen Audit vor, dass Vereinbarkeit im Arbeitsleben machbar ist.
The impact of wind is also part of the static load, since it is classified as “predominantly static”. Dynamic loads The size and direction of the force vary and with it the stress.
They differ in the production process as well as in the structure of the finished plastic part, which is reflected in different cell sizes. The result of both processes is always a microcellular foam structure in the component (even for wall thicknesses of less than 1 mm) and a dense outer layer.
"However, we have to take note that the general conditions in Europe have become more difficult." As a medium-sized family-owned company, EJOT strives to recognize risks, balance them as much as possible and seize opportunities, Kocherscheidt explains.
EJOT® Services Initial sizing Arrangement of a structural engineer Arrangement of an installation contractor Device instruction/assembly demonstration Provision of a device including the necessary accessories Fast delivery of the anchors to your location
The next part of our guide series will deal with the topic of initial sizing. We will not leave you alone with this important task!
Gain experience and earn money on the side We give students, prospective university students the opportunity to gain practical experience during their school and semester breaks - for example as part of a summer job.
Mistake no. 3: Selection of the wrong attachment point Out of four possible attachment points, only two were chosen – and were the two least favourable ones, sitting directly on the edge. Here, the expansion forces of the through bolts create a risk that the edge areas of the concrete will split and the fastening will completely or at least partially lose its load-bearing capacity.
Often, the occurrence of anchor marks depends on the side from which the solar radiation hits the facade or how strongly the surfaces are affected by the weather, i.e. rainfall or humidity (so-called hygric influences).