Search Results

FDS®

With our data sheets we support you in the preparation of a pre-dimensioning.

You are welcome to write us a mail. wdvs@ejot.com

You are welcome to write us a mail. wdvs@ejot.com

You are welcome to write us a mail. wdvs@ejot.com

You are welcome to write us a mail. wdvs@ejot.com

You are welcome to write us a mail. wdvs@ejot.com

You are welcome to write us a mail. wdvs@ejot.com

You are welcome to write us a mail. wdvs@ejot.com

You are welcome to write us a mail. wdvs@ejot.com

In the previous, fourth part of our ETICS guide series "Focus on service", we introduced you to our ETICS product configurator. The main focus here was on selecting anchors for fastening External Thermal Insulation Composite Systems. In the current, fifth part of the guide series, we present the expansion to include the field of application of mounting elements.

You are welcome to write us a mail. wdvs@ejot.com

The next step is the powder booth, where the screws are coated with the paint.

In order to fulfil these increased technical demands for joints of high-strength and dynamically loaded light metal components, EJOT has optimised the reliable ALtracs® screw. The objective of this improvement was to obtain a self-tapping fastener, with assembly parameters similar to a conventional metric 10.9 machine screw.

We can produce or procure all our products on every continent. We are successful with our products and services in Europe, but also on the American, Asian and African continents. We have grown sustainably as an international group .

Downloads Press release LT-TD system [PDF; 89 KB] Picture LT-TD system [PNG; 4.6 MB]

On our LinkedIn channel we keep you up to date on current topics and news.

On our LinkedIn channel we keep you up to date on current topics and news.

If you plan on using self-tapping fasteners we support you already during the development phase with our CAE services. With the help of innovative calculation tools we estimate the behaviour and the effect of our fastening elements on your component under various loads and then give you the respective recommendation.

If you plan on using self-tapping fasteners we support you already during the development phase with our CAE services. With the help of innovative calculation tools we estimate the behaviour and the effect of our fastening elements on your component under various loads and then give you the respective recommendation.

Or would you like to do volunteer work? We can discuss customised solutions in a host of areas.

The building is built on 400 mineral, water-permeable stone columns and on a packet of recycled foam glass. It was renounced from petroleum-based insulant, it was mostly renounced from using plaster board and fully renounced from using energy-intensive tiles.

We would like to inform you about the things that move us.

Expert EJOT staff repair the defective tools to prevent down-times. If possible, we carry out the repairs directly on site.

The first sustainability report for our group of companies shows many of the activities we have initiated to reduce our CO2 emissions - with the aim of achieving climate neutrality by 2035.

You do not want to wait for the future anymore, but rather participate in shaping it? We are always looking for people like you who, together with EJOT, want to shape the industry in a sustainable way.

Over 4.200 employees in 47 international companies. That is who we are.

Let yourself be surprised by our new approach to presenting EJOT's products and services. We are looking forward to your visit!

He added that customers in Germany and Europe would not be neglected. "However, we have to take note that the general conditions in Europe have become more difficult."

Do you have topics, challenges or questions that we can deal with in the TEC ACADEMY?

The first sustainability report for our group of companies shows many of the activities we have initiated to reduce our CO2 emissions - with the aim of achieving climate neutrality by 2035.

Gain experience and earn money on the side We give students, prospective university students the opportunity to gain practical experience during their school and semester breaks - for example as part of a summer job.

In the past, it was customary to plant forest plants in the ground without a root ball (the forester would say bare-root).

So, it was a creative reunion for the video shoot in Bad Berleburg.

Wixom, MI, USA – EJOT Fastening Systems LP was named a 2020 Automotive News PACE Award winner at an awards ceremony on April 28.

EJOT Construction Fastening Systems Inc. Unfortunately, we do not have an internet presence for Canada. But you can find products in the navigation on the left side or you contact the following address EJOT Construction Fastening Systems Inc. 6599 Kitimat Rd., Unit No. 2 Mississauga, Ontario L5N 4J4, Canada phone: +1 226-499-9977 e-mail: infoca@ejot.com

05.01.2021, Construction Division EJOT was able to prevail in the vote for the DETAIL Product Award 2020 for the CROSSFIX® substructure system for the rear-ventilated facade (VHF) and thus win the coveted award.

We are pleased to inform you that EJOT GmbH & Co.

Science journalist Ranga Yogeshwar presented the TOP 100 seal to Prof Dr Ralph Hellmig, Director Technology Management Fasteners, and Ralf Birkelbach, Chief Technology Officer (CTO), on the occasion of the "Deutscher Mittelstands-Summit" (German SME summit) in Augsburg. Picture credits: KD Busch / compamedia

The system with 3,762 solar modules, which was completed in June 2018, now delivers around 1,024 MWh of electricity annually – enough for 250 four-person households.

The 26th annual PACE Awards were presented by Automotive News, Deloitte and the Automotive Parts Manufacturers’ Association (APMA). The Government of Canada was a platinum sponsor. The competition was open to suppliers that contribute products, processes, materials or services directly to the manufacture of cars or trucks.

“We are often completely dependent on external developments and service providers such as suppliers.” In order to reduce Scope 3 emissions quickly and sustainably, EJOT is in close dialogue with its suppliers. For example, a workshop was held with eleven suppliers from the entire supply chain to develop ways to reduce CO2e.

For this reason they have to be sure of their partner's performance. We are aware of this responsibility. Years ago we established a quality management system that fulfills highest demands and puts the focus on error prevention.

Here we provide you with data sheets containing all relevant information for preparing pre-dimensioning.

1 to 1 sale As an alternative to the verification system, we also offer a so-called ‘1 to 1 sale’.

The first environmental product declaration (EPD) for anchor manufacturers was obtained by EJOT and we can now present a comprehensive and complete record for the sustainability and the balance of environmental influences of our products.

Cracked concrete In our first contribution to the different substrates, we described the high compressive strength of concrete as a major advantage.

In the scientific selection process EJOT was convincing in the size category C (over 200 employees) and especially in the category “Innovative processes and organization”.

EJOT is investing about ten million euros in this project. "In terms of construction, we are moving with the times," emphasised architect Prof.

The EJOT production site Herrenwiese in Bad Berleburg has received the ‘Formel Q Certificate’ of the Volkswagen Group. This was preceded by a three-day audit, 92 percent of the requirements of which were met, as Friedbert Müller, Quality Manager at the Herrenwiese site, explains. The process audit is carried out according to the Association of the Automotive Industry (VDA-QMC). In addition, the requirements added in the ‘Formel Q Ability’ must be taken into account.

If EJOT achieves the annual CO2 savings target, the investment will be doubled by the company and will also earn an attractive interest rate. In 2022 and 2023, EJOT was able to significantly exceed its savings targets of 5,000 tonnes of CO2 in each year – the employees’ contributions were doubled. “We assume that EJOT will also achieve the climate targets set this year and that we will therefore also double the employees’ contributions in the third tranche,” emphasises Wolfgang Bach.

Guidebook on rainscreen facades – Knowing what's important In our guidebook on rainscreen facade we have discussed the structure and advantages of a rainscreen facade, the basics of anchoring, and the characteristics and special features of a single or multiple fastening of non-load-bearing systems. The correct selection and installation of plastic facade anchors, through bolts and injection mortar were also discussed and the importance of an unrestrained fastening was clarified. Any further questions?

18.05.2021, Construction Division The CROSSFIX® substructure system for rear ventilated facade constructions by EJOT was recently awarded with the German Innovation Award.

The CROSSFIX® substructure was developed to meet the requirements of architects, builders and manufacturers who place great emphasis on sustainability, environmental protection, flexibility and the highest safety requirements.

In view of the great suffering and the unbelievable destruction caused by the Russian aggressors in Ukraine, there will be no economic "business as usual" in the near future. In all these considerations we have to take into account that we have a duty of care towards our 70 colleagues of the EJOT subsidiary in Wostok and that we also fulfil this duty - as far as we are able to do so in this difficult situation.

The through bolt was installed at an angle and could not be mounted flush with the attachment.

The Kreisbahn Siegen-Wittgenstein had commissioned DB Cargo with the rail transport from Kreuztal to Graz. For Kuehne+Nagel, the transport was a test run to find an answer to the question of whether it makes sense to transport EJOT products by train from Kreuztal to Graz.

REACH Compliance EJOT, as defined by REACH, is a downstream user and therefore is not responsible for documenting substances. We attach great importance to quality and safety; as a consequence, every product is subject to regular strict controls.

Our philosophy is based on high quality and service and we expect the same level from our suppliers in order to satisfy both our customers and our own needs. Furthermore we encourage our suppliers to find common solutions for the improvement of products, procedures and processes. We are working on a fair and co-operative basis, aiming at a long-term business relation.

Contact: For a first topic coordination, please write us an email with your problem description: dkorn@ejot.com You can also contact us by phone: +49 2751 529 - 2088 If it is a more complex task, we would be happy to arrange a conference call or an on-site visit.

After we have dealt with the different Types of screws in the first part of the self-drilling screw guide, we will deal with the screw heads and drive types in the second article. In addition to functionality, optics also play a role for the screw heads. In the following, we will therefore take a closer look at the most common head styles and drives for self-drilling screws: Hexagon head and hexagon drive In the case of screws with a hexagon head, we speak of hexagon screws (also called wrench screws).

EJOT stocks a comprehensive portfolio of fastening solutions for solar systems on a wide variety of roof types and substrates. We offer the perfect solution for every requirement, delivering comprehensive guidance and developing individualised, customised products when necessary. We work with our customers to find the perfect fastening for your individual needs.

Uwe Braun, CEO of ArcelorMittal Hamburg: "Thanks to this cooperation, we are creating a special value chain that contributes to the climate goals of the companies involved. Once again we see that low carbon-emissions steel is vital for building the infrastructure we need for the transition to carbon neutrality. After all, solar modules, efficient electric cars or wind turbines cannot be made without steel. We are already able to produce very low-carbon and, in a few years, climate-neutral steel.

It is our claim to stand by your side as a reliable partner. We are not satisfied until you are satisfied.

The following letter helps us to distinguish the anchors with the same diameter. For instance, the SDF-10V was designed for solid building materials (V) and the SDF-10H for hollow building materials (H).

In the first two parts of the Corrosion guide, we dealt with the different types of corrosion and also looked closely at different ways of reducing corrosion damage. In this part we will look at the assessment of the corrosion environment and explain the corrosivity categories and corrosion resistance classes.

In the first two parts of the self-drilling screw guide, we covered the different types of self-drilling screws as well as the different head styles and drive types.

After we have dealt with the different Types of corrosion in the first part of the corrosion guide, the second article will talk about the possibilities of preventing corrosion damage.

As a special service, EJOT offers the preparation of pre-dimensioning for its products. Based on your project data, we determine the type and quantity of fastening elements required using calculation and appropriate pulling force tests.

Sustainability of the console convinces visitors It was in particular the aspect of low thermal conductivity which was met with great interest, since it enables a reduction of the cold transmittance values while maintaining the fire protection.

What material is the base material made of? In the construction industry, we encounter different options as base material.

In the first articles of the heavy-duty anchor guide, we dealt with the type of base material and its requirements for fastening elements. The third part focuses on the anchoring methods. We shed light on the function principles and fastening elements and their advantages and disadvantages. We generally differentiate between three physical function principles of anchoring: friction lock, form-fit and adhesive bond.

A vapor barrier layer (c) is installed between the substrate, the so-called load-carrying layer (d), and the thermal insulation layer.

EJOT® Worldwide Find your contact person for all EJOT distribution and production companies and our partner and sales offices – worldwide. We look forward to hearing from you.

Our customers expect top performance from us. This is why we set a high standard for the quality and service of our suppliers. As part of value creation and the supply chain, they are essential factors in our success. We consider our suppliers as partners with whom we would like to co-operate faithfully and pragmatically in the long term.

Contact EJOT® Market Unit Construction We are here for you

The “secret“ of the DELTA PT® screw is its special thread geometry. The flank geometry of this screw was optimised through consequent analysis of the material displacement during the thread grooving.

STR heads (countersunk head, image on the left) are added to the screw length. In the case of screws with STS heads (plate head, picture on the right) resting on them, the screw length is measured to below the head.

EJOT SPOJNA TEHNIKA d.o.o. Unfortunately, we do not have an internet presence for Croatia.

You would like to advance in your job and you are a real team player? Then we want to shape the future at EJOT together with you.

EJOT converts customer requirements into individual product solutions. We do not only consider the individual fastening point, but the entire component or assembly.

In the first part of our guide to self-drilling screws we will give you a general overview of the different screw types and you will learn more about the respective special features. Two types of screws in industrial lightweight construction In the field of industrial lightweight construction, we basically differentiate between self-tapping (also called thread-cutting) and self-drilling screws.

In the next article of our guide on the topic of heavy-duty anchoring, we will show that there are other external influences besides loads that play a major role in the choice of fastening elements, including corrosion.