TE 60/110

Specification

  • Application range and properties

    • For fastening External Thermal Insulation Composite Systems with problematic substrates
    • To combine with EJOT SDF-S plus 8UB
    • Available in two lengths
    • With European Technical Assessment
    • For surface fixed installation
    • Can be combined with additional washers EJOT SBL 140 plus and EJOT VT 90
    • Washer diameter: 60 mm
    • Special sealing plug made of polystyrene (EPS) included in the scope of supply
  • Technical specifications

    • Shaft length EJOT TE 60/50: 50 mm
    • Shaft length EJOT TE 60/110: 110 mm
    • Washer Diameter: 60 mm
    • Screw drive: TORX T30
    • Drill hole depth h1: ≥ 80 mm
    • Embedment depth hef: ≥ 70 mm
    • Point thermal transmission Χ EJOT TE 60/50 with insulation thicknesses 60 - 180 mm: 0.002 W/K
    • Point thermal transmission Χ EJOT TE 60/110 with insulation thicknesses 120 - 150 mm: 0.00 W/K
    • Point thermal transmission Χ EJOT TE 60/110 with insulation thicknesses 150 - 240 mm: 0.001 W/K
    • European Technical Assessment: ETA-04/0064
Find the right anchor lengths: ETICS anchor configurator
ETICS products are only available from system suppliers
Orderidentifier Article Number Washer diameter mm Length mm Unit
Tube-washer-TE-60-110 8533110000 60.0 110.0 100

Specifications

Washer diameter
60.0
Length
110.0
Embedment depth hef
70.0
Drill hole depth
80.0
Orderidentifier
Tube-washer-TE-60-110
Unit
100

TE 60/110 for fastening External Thermal Insulation Composite Systems with problematic substrates. Learn more ▶