EJOT® SDF-S plus 8UB

Applications

Brick slip system anchor for concrete and masonry

• For concrete, solid and perforated masonry
• Anchor tube with small countersunk head for unobtrusive installation in the joint

Properties

• Approved for concrete, solid and perforated masonry (A, B, C, D)
• Anchor tube with small countersunk head for unobtrusive installation in the joint
• Torsion-proof anchor tube
• Universal expansion zone for safe anchoring
• High loads
• Anchor with increased bending moment
• Premounted screw for quick installation
• German DIBt approval: Z-21.2-589

• Technical specifications

  • Anchor diameter: 8 mm
  • Diameter of countersunk head: 12 mm
  • Drill hole depth h₁ ≥: 80 mm
  • Embedment depth h_ef ≥:  70 mm
  • Screw drive: TX30
  • German DIBt approval: Z-21.2-589

  Characteristic loads:

  
  Building material class A:

  • Normal weight concrete ≥ C 12/15 acc. to EN 206-1: 1.0 kN
  • Pre-cast concrete Panel ≥ B15: 0.25 kN

  Building material class B:

  • Clay bricks(≥ Mz 12) acc. to DIN 105: 0.4 kN
  • Solid lime sandstone (≥ KS 12) acc. to DIN EN 106: 0.4 kN
  • Solid masonry of lightweight concrete (V) acc. to DIN 18152: 0.2 kN

  Building material class C:

  • Vertically perforated clay bricks (Hlz) acc. to DIN 105: *
  • Vertical coring reference brick (Hlz) acc. to ÖNORM B 6124: 0.75 kN
  • Sand-lime perforated bricks (≥ KSL 6) acc. to DIN EN 106: 0.25 kN
  • Lightweight concrete hollow blocks (≥ HbL 2) acc. to DIN 18151: 0.15 kN

  Building material class D:

  • Lightweight aggregate concrete acc. to TGL: 0.3 kN

  *According to approval to be determined throught pull-out testing at the building.

  The design loads given are in accordance with the German building code. National safety factors are already incorporated. Please observe the approval.