Applicator gun AP 420
Pressing-out of cartridges
Injection System Multifix USF
Specification
-
Application range
- For installation in cracked concrete (option 1) and non-cracked concrete (option 7) (ETA-16/0107)
- For installation in masonry (ETA-16/0089)
- Approved for anchor rods M8, M10, M12, M16, M20, M24
- Post-installed rebar applications
-
Properties
- Vinyl resin, styrene-free
- Can be used in wet concrete and water-filled drill holes
-
Notice
Please observe the corresponding approvals during planning and processing.
The storage temperature must not permanently exceed 25 °C! Please store upright!
Included in delivery
1 mortar cartridge USF 280 ml incl. 2 mixing nozzles
1 mortar cartridge USF 420 ml incl. 1 mixing nozzle
Filter
Selected filters
| Orderidentifier | Article Number | Content ml | Composite mortar | Amount mixing nozzle | Unit |
|---|---|---|---|---|---|
| Multifix USF 280 ml | 9571000280 | 280.0 | Vinylester, styrene free | 2 | 1 |
Specifications
|
|||||
| Multifix USF 420ml | 9571001420 | 420.0 | Vinylester, styrene free | 1 | 1 |
Specifications
|
|||||
| EJOT Multifix USF 420ml | 9571001420 | ||||
Specifications
|
Multifix Calculator
Calculate the mortar cartridges required for your project with this calculation tool. It will help you to reduce waste and make your installation more cost-effective.
- Select thread diameter from the list on the far left.
- Select the number of holes to fill by entering them in the text box above the illustration or alternatively use the plus and minus buttons.
- Select the drilling depth using the plus and minus buttons in the illustration.
- Done! The number of mortar cartridges required is now displayed.
Further Products
Applicator gun side by side AP 345 ml
Pressing-out of cartridges