Mesh sleeve USF

Siebhuelse_Pos2

Specification

Applications
- For embedment in perforated brick
Properties
- Guarantees exact calibration of threaded rod
Note

For planning and processing, please observe ETA-16/0089

Downloads

Filter

Selected filters

Orderidentifier	Article Number	Length mm	Hole depth h₁ ≥ mm	suitable for thread	Unit
M8 10 Mesh sleeve USF 12x80	9571012080	80.0	85.0	M8	10
Specifications Length 80.0 Hole depth h₁ ≥ 85.0 suitable for thread M8 Orderidentifier M8 10 Mesh sleeve USF 12x80 Unit 10
M8 / M10 10 Mesh sleeve USF 16x85	9571016085	85.0	90.0	M8, M10	10
Specifications Length 85.0 Hole depth h₁ ≥ 90.0 suitable for thread M8, M10 Orderidentifier M8 / M10 10 Mesh sleeve USF 16x85 Unit 10
M8 / M10 10 Mesh sleeve USF 16x130	9571016130	130.0	135.0	M8, M10	10
Specifications Length 130.0 Hole depth h₁ ≥ 135.0 suitable for thread M8, M10 Orderidentifier M8 / M10 10 Mesh sleeve USF 16x130 Unit 10
M12 / M16 10 Mesh sleeve USF 20x85	9571020085	85.0	90.0	M12-M16	10
Specifications Length 85.0 Hole depth h₁ ≥ 90.0 suitable for thread M12-M16 Orderidentifier M12 / M16 10 Mesh sleeve USF 20x85 Unit 10
M12 / M16 10 Mesh sleeve USF 20x130	9571020130	130.0	135.0	M12-M16	10
Specifications Length 130.0 Hole depth h₁ ≥ 135.0 suitable for thread M12-M16 Orderidentifier M12 / M16 10 Mesh sleeve USF 20x130 Unit 10

EJOT Multifix® Calculator

Calculate the mortar cartridges required for your project with this calculation tool. It will help you to reduce waste and make your installation more cost-effective.

Select thread diameter from the list on the far left.
Select the number of holes to fill by entering them in the text box above the illustration or alternatively use the plus and minus buttons.
Select the drilling depth using the plus and minus buttons in the illustration.
Done! The number of mortar cartridges required is now displayed.