1. Home
  2. Building Fasteners
  3. Products
  4. Self-drilling Screws
  5. EJOT® self-drilling screw JT9-2/5-5.0 VARIO

EJOT® self-drilling screw JT9-2/5-5.0 VARIO

Specification

  • Applications

    • To form sliding and fixed points on substructures of rear-ventilated
      facades
    • Fastening pre-drilled stainless steel or aluminium wall brackets
      to aluminium support profiles
  • Properties

    • One screw for all part combinations
    • Sliding washer E14, Ø 14 mm
    • Buffer zone between the screw head and sliding disk prevents
      excessive clamp load of the joint.
      Pre-assembled captive sliding washer
    • Consistently low contact pressure prevents stick-slip phenomenon
    • No stripping / destruction of the thread in component II resulting
      in high tensile loading capacity
    • High tensile and transverse load transmission in component II
      due to fine pitch thread
    • National technical test certificate (abP) as proof of usability
      according to DIN 18516-1 (also available as informal English
      translation)
    • Case hardened drill point of the JT6 version for fastening in
      steel support profiles (not part of the abP)
    • Wall brackets made of stainless steel and aluminium are part
      of the abP
    • Buffer zone serves as visual set control
    • Same assembly concept for sliding and fixed points

    Note
    Component assemblies checked with Rm (component II) ≥ 190,
    ≥ 215 and ≥ 245 N/mm2. For bearing values, please refer to the
    national technical test certificate (abP) P-BWU02-178006

  • Technical specifications

    • Diameter: 5.0 mm
    • Drilling capacity 3.0 mm
    • A/F8 hexagon drive
    • Assembly torque: 1500 rpm
    • Sliding washer E14, Ø 14 mm

     

    Notice
    Component assemblies checked with Rm (component II) ≥ 190, ≥ 215 and ≥ 245 N/mm2. For bearing values, please refer to the general building authorities test certificate (abP) P-BWU02-178006.

Orderidentifier Article Number ø mm Length mm Unit
JT9-2/5-5.0x25 Vario VE100 6500777490 5.0 25.0 100

Specifications

ø
5.0
Length
25.0
Orderidentifier
JT9-2/5-5.0x25 Vario VE100
Unit
100

CAD

* Thank you for your interest in our CAD data. To be able to use this area, simply log in or please register here.

CAD & more - Your Online Service Area

Unfortunately you currently have no authorization to use "CAD & more".

Unfortunately, this data can not be provided to you without the consent of the confidentiality agreement.
Your request will be manually verified, this can take 1 to 3 business days.

  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Grant Access to CAD Data

Unfortunately you currently have no authorization to use "CAD & more".

Apply for access to CAD data.

CAD & More

"CAD & More" provides you with confidential information about our products DELTA PT®, ALtracs® Plus, SHEETtracs® (CAD files, product files, drawings etc.). This data can only be accessed by customers of the EJOT Industrial Division and will not be made


  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Thank you!

Your request will be manually verified, this may take 1 to 3 business days.
You will receive an e-mail as soon as your access for "CAD & more" has been activated.
Thank you for your patience.



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Confirm CAD data renewal

In the e-mail sent by us you will find the link to verify your account, please click on it.
If you do not receive an e-mail within a few minutes, please check your spam folder.



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Can not be renewed

Please contact our customer care



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Can not process your request for CAD

Please contact our customer care



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com