1. Home
  2. Building Fasteners
  3. Products
  4. Anchoring
  5. Chemical Anchors
  6. Anchor rod AST / threaded rod

Anchor rod AST / threaded rod

produktabbildung

Specification

  • Application range

    • For embedment in concrete and solid brick
    • For embedment in perforated brick in combination with mesh sleeve

  • Properties of AST steel

    Properties of AST steel

    • Anchor rod: property class 5.8 acc. to EN ISO 898-1
    • Nut: property class 5 according to EN ISO 898-2
    • Washer: acc. to EN ISO 7089

  • Properties of AST stainless steel (1.4401/1.4571)

    • Anchor rod: EN 10088; property class 70 (A4-70) acc. to EN ISO 3506
    • Nut: EN 10088; property class 70 (A4-70) acc. to EN ISO 3506
    • Washer: acc. to EN 10088

    Notice
    To determine the characteristic load-bearing capacity in concrete or masonry, the ETAs of the chemical mortars in the
    EJOT MULTIFIX® range must be observed.

Further lengths upon request

Filter

Selected filters

    Orderidentifier Article Number Material Thread Unit
    AST M8x110-V 9570098110 Carbon Steel M8 10

    Specifications

    Material
    Carbon Steel
    Thread
    M8
    Orderidentifier
    AST M8x110-V
    Unit
    10
    AST M8x110-E 9571098110 Stainless Steel M8 10

    Specifications

    Material
    Stainless Steel
    Thread
    M8
    Orderidentifier
    AST M8x110-E
    Unit
    10
    AST M10x110-E 9571910110 Stainless Steel M10 10

    Specifications

    Material
    Stainless Steel
    Thread
    M10
    Orderidentifier
    AST M10x110-E
    Unit
    10
    AST M10x130-V 9570910130 Carbon Steel M10 10

    Specifications

    Material
    Carbon Steel
    Thread
    M10
    Orderidentifier
    AST M10x130-V
    Unit
    10
    AST M10x130-E 9571910130 Stainless Steel M10 10

    Specifications

    Material
    Stainless Steel
    Thread
    M10
    Orderidentifier
    AST M10x130-E
    Unit
    10
    AST M12x160-V 9570912160 Carbon Steel M12 10

    Specifications

    Material
    Carbon Steel
    Thread
    M12
    Orderidentifier
    AST M12x160-V
    Unit
    10
    AST M12x160-E 9571912160 Stainless Steel M12 10

    Specifications

    Material
    Stainless Steel
    Thread
    M12
    Orderidentifier
    AST M12x160-E
    Unit
    10
    AST M10x170-V 9570910170 Carbon Steel M10 10

    Specifications

    Material
    Carbon Steel
    Thread
    M10
    Orderidentifier
    AST M10x170-V
    Unit
    10
    AST M10x170-E 9571910170 Stainless Steel M10 10

    Specifications

    Material
    Stainless Steel
    Thread
    M10
    Orderidentifier
    AST M10x170-E
    Unit
    10
    AST M16x190-E 9571916190 Stainless Steel M16 10

    Specifications

    Material
    Stainless Steel
    Thread
    M16
    Orderidentifier
    AST M16x190-E
    Unit
    10

    EJOT Multifix® Calculator

    Calculate the mortar cartridges required for your project with this calculation tool. It will help you to reduce waste and make your installation more cost-effective.

    • Select thread diameter from the list on the far left.
    • Select the number of holes to fill by entering them in the text box above the illustration or alternatively use the plus and minus buttons.
    • Select the drilling depth using the plus and minus buttons in the illustration.
    • Done! The number of mortar cartridges required is now displayed.

    Calculator

    Further Products

    USF-Kartusche2_1200x1200

    Injection System EJOT MULTIFIX® USF

    For medium-duty applications in concrete and masonry

    USF-Winter-Folienbeutel_1200x1200

    Mortar cartridge EJOT MULTIFIX® USF 300 ml winter

    For medium-duty applications in concrete and masonry for low temperatures

    Hammerbohrer-sds-plus_1200x1200

    Hammer drill SDS-plus with 4 edge geometry

    Series drilling in hard concrete