EJOT® Transition profile ceramic 30 mm, EJOT® Pro UEPK06-30/01

Applications

• Profile for forming a horizontal transition with drip edge from plaster to ceramic cladding with targeted water flow.

Properties

• Targeted drainage of water through drip edge
• Exact and clean plaster finish thanks to bendable protective flap
• Rectangular plug-in connector for aligned and perpendicular edges
• High stability thanks to hollow chamber in the front area

Technical specifications

• Hard PVC profile with white glass fiber mesh / 160 g, alkali-resistant and non-shifting
• Mesh flag 12.5 cm

Please note

• Store in a cool and dry place
• Transport and storage lying down
• No paint allowed

Processing guidelines
The area between the profile and the ceramic cladding must be sealed with suitable sealants. Apply the reinforcement compound across the entire width of the mesh
strip. Embed the profile into the fresh reinforcement compound, ensuring that it is level and aligned. Connect the profiles using the plug-in connector provided. Then
form a joint of at least 3 mm. Stick the cover film onto the provided transfer tape on the flap. When applying the surface reinforcement, the glass fiber mesh must be
overlapped and brought up to the pull-off edge. After completing the work, the protective flap must be bent towards the trigger bar and then pulled off. Finally, seal
the longitudinal joint with a suitable sprayable sealant (e.g. MS polymer hybrid sealant).