EJOT® Pro PAP

Specification

  • Applications

    To form an exact transition between different (types of) render layers as well as to finish these, e.g. with balcony undersites. Used to produce clean plaster borders and transitions.

  • Properties

    • Exact and clean plaster finish
  • Technical specifications

    Hard PVC profile with glass mesh 160 g, alkali-resistant and non-shifting. Mesh flag 12.5 cm.

    Processing guidelines
    Cut the profile to the required length with special scissors with beads. The profile is then embedded in the wet reinforcement compound and filled in with a spatula in accordance with the alignment. The glass fiber mesh of the subsequent surface reinforcement must be pulled up to the plaster edge in order to counteract cracking in the joint area.

    Indications

    Store in a cool and dry place

    Transport and storage lying down

Filter

Selected filters

    Orderidentifier Article Number measure mm Unit
    EJOT Pro PAP03/01-200-160-WL-12.5 8810012048 3.0 25

    Specifications

    measure
    3.0
    Orderidentifier
    EJOT Pro PAP03/01-200-160-WL-12.5
    Unit
    25
    EJOT Pro PAP06/01-200-160-WL-12.5 8810022048 6.0 25

    Specifications

    measure
    6.0
    Orderidentifier
    EJOT Pro PAP06/01-200-160-WL-12.5
    Unit
    25
    EJOT Pro PAP08/01-200-160-WL-12.5 8810032048 8.0 25

    Specifications

    measure
    8.0
    Orderidentifier
    EJOT Pro PAP08/01-200-160-WL-12.5
    Unit
    25
    EJOT Pro PAP10/01-200-160-WL-12.5 8810042048 10.0 25

    Specifications

    measure
    10.0
    Orderidentifier
    EJOT Pro PAP10/01-200-160-WL-12.5
    Unit
    25