EJOT® facade anchor SDF-S-8V

Specification

  • Applications

    • The efficient alternative for fixing timber substructures to solid brick masonry and concrete

    Notice

    For planning and processing, please observe ETA-15/0387

    Instructions for using galvanic zinc-plated facade anchor screws (excerpt from ETA-15/0387)

    The special screw made of galvanic zinc-plated steel may also be used outside, after careful installation and if the area of the screw head is protected against moisture and driving rain in such a way, that no moisture can enter the anchor shaft. This requires facade cladding of rain screen fixed in front of the screw head and the screw head has to be coated with a soft-plastic, permanently elastic, bitumen oil combination coat (e.g. car underbody coating or cavity protection).

  • Properties

    • Countersunk head
    • Small drill-hole diameter
    • Product identification through different sleeve colours
  • Technical specifications

    Characteristic values

    • Diameter: 8.0 mm
    • Drive: Hexalobular drive T30
    • Drill hole depth ≥ h1: 60 mm
    • Embedment depth ≥ hnom: 50 mm

    Characteristic loads*

    • Tensile strength NRk,p in concrete < C16/20: 4.50 kN
    • Tensile strength NRk,p in concrete ≥ C16/20: 6.50 kN
    • Brick Mz 28-1.8, NF: 2.50 kN
    • Solid lime sand brick KS, NF 20-2.0: 2.00 kN
    • Transverse strength VRk,s
         Anchor with steel screw: 5.30 kN
    • Bending moment MRk,s
         Anchor with steel screw: 8.20 Nm

    *applies to temperature range 30-50 °C / 50-80 °C

CAD

* Thank you for your interest in our CAD data. To be able to use this area, simply log in or please register here.

CAD & more - Your Online Service Area

Unfortunately you currently have no authorization to use "CAD & more".

Unfortunately, this data can not be provided to you without the consent of the confidentiality agreement.
Your request will be manually verified, this can take 1 to 3 business days.

  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Grant Access to CAD Data

Unfortunately you currently have no authorization to use "CAD & more".

Apply for access to CAD data.

CAD & More

"CAD & More" provides you with confidential information about our products DELTA PT®, ALtracs® Plus, SHEETtracs® (CAD files, product files, drawings etc.). This data can only be accessed by customers of the EJOT Industrial Division and will not be made


  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Thank you!

Your request will be manually verified, this may take 1 to 3 business days.
You will receive an e-mail as soon as your access for "CAD & more" has been activated.
Thank you for your patience.



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Confirm CAD data renewal

In the e-mail sent by us you will find the link to verify your account, please click on it.
If you do not receive an e-mail within a few minutes, please check your spam folder.



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Can not be renewed

Please contact our customer care



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Can not process your request for CAD

Please contact our customer care



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com