EJOT® facade anchor SDF-KB-14A

Specification

  • Applications

    • Installation of metal attachments
    • For non-supporting redundant systems according to ETAG 020
    • Suitable for the structural fastening of wall cupboards, cladding, metal angle pieces

    Notice

    For planning, please observe approval ETA-15/0027.

  • Properties

    • Hexagon head with flange
    • Approved for all common building materials
    • Reliable hold in problematic building material thanks to optimised expansion part
    • Radial expansion for reliable hold
    • Product identification through different sleeve colours
    • Double safety lock against torsion for secure installation
  • Technical specifications

    Characteristic values

    • Diameter: 14 mm
    • Drive: Hexagon A/F17
    • Drill hole depth ≥ t: 80 mm
    • Embedment depth ≥ hv: 70 mm 

    Characteristic loads*

    • Tensile load NRk,pin concrete > C12/15: 8.50 kN
    • Brick Mz 20-1,8, NF: 5.50 kN
    • Solid lime sand brick KS, 2 DF 20-2,0: 6.00 kN
    • Solid lime sand brick KS, 8 DF 20-1,8: 7.00 kN
    • Solid brick V, 3 DF: 3.00 kN
    • Vertically perforated brick HLz, 2 DF 28-1.2: 2.00 kN
    • Perforated sand-lime brick KSL, 8 DF 16-1.4: 2.50 kN
    • Cavity block tile made of lightweight concrete Hbl, 12 DF: 2.00 kN
    • Aerated concrete f≥ 2 N/ mm2: 1.20 kN
    • Aerated concrete f≥ 4 N/ mm2: 2.50 kN
    • Aerated concrete f≥ 6 N/ mm2: 3.50 kN
    • Transverse load VRk,s
      • Anchor with steel screw: 21.7 kN 
      • Anchor with A4 stainless steel screw: 25.3 kN
    • Bending moment MRk,s
      • Anchor with steel screw: 62.5 Nm
      • Anchor with A4 stainless steel screw: 72.9 Nm

     *applies to temperature range 30-50 oC / 50-80 oC

CAD

* Thank you for your interest in our CAD data. To be able to use this area, simply log in or please register here.

CAD & more - Your Online Service Area

Unfortunately you currently have no authorization to use "CAD & more".

Unfortunately, this data can not be provided to you without the consent of the confidentiality agreement.
Your request will be manually verified, this can take 1 to 3 business days.

  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Grant Access to CAD Data

Unfortunately you currently have no authorization to use "CAD & more".

Apply for access to CAD data.

CAD & More

"CAD & More" provides you with confidential information about our products DELTA PT®, ALtracs® Plus, SHEETtracs® (CAD files, product files, drawings etc.). This data can only be accessed by customers of the EJOT Industrial Division and will not be made


  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Thank you!

Your request will be manually verified, this may take 1 to 3 business days.
You will receive an e-mail as soon as your access for "CAD & more" has been activated.
Thank you for your patience.



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Confirm CAD data renewal

In the e-mail sent by us you will find the link to verify your account, please click on it.
If you do not receive an e-mail within a few minutes, please check your spam folder.



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Can not be renewed

Please contact our customer care



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com

Can not process your request for CAD

Please contact our customer care



  • For technical questions please contact our Hotline Team +49 2751 529-123
    Problems with your access? Mail to: service-industrie@ejot.com