1. Home
  2. Building Fasteners
  3. Products
  4. ETICS Anchors
  5. ejotherm® screw-in anchor S1 short

ejotherm® screw-in anchor S1 short

Specification

  • Applications

    • For fastening external thermal insulation systems with a render layer
    • Specifically developed for thin insulating materials (20 - 60 mm), for example high-performance insulation > 20 mm as well as reveal boards and ceiling insulation boards > 20 mm
    • Installation in all substrates
    • Surface fixed installation
  • Properties

    • Approved for all building material categories (A, B, C, D, E)
    • Highly comfortable installation and assembly
    • Optimised thermal bridge
    • Can be mounted with additional washer VT 90 and SBL 140 plus
  • Technical specifications

    • Anchor diameter: 8 mm
    • Washer diameter: 60 mm
    • Drill hole depth h1≥ Use category A - D: 40 mm
      Drill hole depth h1≥ Use category E: 60 mm
    • Embedmentdepth hef ≥ Use category A - D: 30 mm
      Embedmentdeph hef ≥ Use category E: 50 mm
    • Screw drive: IPR 30 (5 lobe)
    • Insulation material thickness: 20 - 60 mm
    • Use categories: A, B, C, D, E

     

    Characteristic loads can be found in the brochure

Note: The processing of the ejotherm S1 short is only possible with the above-mentioned installation tools.

Orderidentifier Article Number Length mm Substrate categories A-D, Insulation [mm]
new building / old building
Substrate category E, Insulation [mm]
new building / old building
Unit
ejotherm S1 short 100 8715100570 100.0 60 / 40 40 / 20 100

Specifications

Length
100.0
Substrate categories A-D, Insulation [mm]
new building / old building
60 / 40
Substrate category E, Insulation [mm]
new building / old building
40 / 20
Orderidentifier
ejotherm S1 short 100
Unit
100