Drop-in anchor LAL

Specification

  • Applications

    • For use as single fastener according to ETAG 001; Part 4 in non-cracked concrete (see ETA-13/0442)
    • For use as a multiple fastener in non-supporting systems in cracked and non-cracked concrete, e.g. suspension systems, pipelines, air ducts, sprinkler systems, cable racks, machines, supports and ceiling beams (see ETA 13/0441)
    • Also suitable for reinforced concrete hollow floor, natural stone and brick
    • Suitable for dry indoor areas
  • Properties

    • With collar, steel, galvanized zinc-plated
    • Internal thread for metric screws and rods
    • The suitable bolt length is 1-1.5 x nominal anchor length + component thickness
    • The smallest required drill hole depth

Filter

Selected filters

    Orderidentifier Article Number Thread Diameter mm Length mm Clamping thickness B ≥ mm Hole depth t ≤ mm Unit
    LAL+8 9650070072 10.0 30.0 13.0 32.0 100

    Specifications

    Thread Diameter
    10.0
    Length
    30.0
    Clamping thickness B ≥
    13.0
    Hole depth t ≤
    32.0
    Embedment
    30.0
    Orderidentifier
    LAL+8
    Unit
    100
    LAL+10 9650070074 12.0 40.0 16.0 43.0 100

    Specifications

    Thread Diameter
    12.0
    Length
    40.0
    Clamping thickness B ≥
    16.0
    Hole depth t ≤
    43.0
    Embedment
    40.0
    Orderidentifier
    LAL+10
    Unit
    100