Search Results

Search Help: 

Are you searching for editorials or for product specifications?
Your results are sorted by two tabs. If you are searching editorial, the right tab highlights case studies, reviews etc. If you are searching for a product in the e-shop, please choose the left tabs.
DH_zweiteilig

DH (set)

Insulation Support Anchor

consist of plate and shank
_EJOT_Montageset

Installation set

ETICS Tools & Accessories

for installing base rails
Delta-PT-Set-Iso-Corner-500x500-2

Iso-Corner Set DELTA PT

ETICS Mounting elements

for fastening add-on parts on EJOT® Iso-Corner
combo-new

Combo Set

Pipe Flashings

For waterproofing pipes on roofs
Rohrmanschette_Soaker

Soaker Set

Pipe Flashings

Pipes with large openings
Solarbefestiger JA3 mit Faserzementdichtung

Solar Fastener set JA3-SB-8.0 xL with FZD fibre cement seal

Solar Fasteners

For wooden substructure
Solarbefestiger JA3 mit ORKAN-Kalotte Trapez

Solar Fastener set JA3-SB-8.0xL with E16 + ORKAN storm washer

Solar Fasteners

For wooden substructure
JT3-SB-8-0-FZD

Solar Fastener set JT3-SB-3-8.0 xL with FZD fibre cement seal

Solar Fasteners

Rohrmanschette_Dektite_Square_Foto1

Square (Set)

Pipe Flashings

For waterproofing pipes on roofs
FEIN_Profil-Set_160

Profil-Set 160 for BLK 2.0 E / ABLK 1.6 E

Installation Tools

Produktbild1

Solar Fastener set JT3-SB-3-8.0xL with E16 + ORKAN storm washer

Solar Fasteners

For steel substructures

Tightener/cable tie

Tightener/cable tie

Pipe Flashings

Seal between pipe and pipe flashing
_EJOT_drillX_Ersatzteilkit

drillX spare parts kit

ETICS Tools & Accessories

Cone expeller
Pilzdichtung-25

Mushroom washer

Accessories

For fixing light diffusing panels
ABLK-18-1.6-E-Select_Pos2

ABLK 18 1.6 E Select

Installation Tools

Battery powered nibbler
Bolzensetzgeraet_P560

Shot firing tool P 560

Direct Assembly

Fixing of cassettes
_ejotherm_STR_tool2G_Ersatzteilkit

ejotherm® STR tool spare parts kit

ETICS Tools & Accessories

Spare parts kit
EJOSYST_ADJUST_Gruppe

EJOT® ADJUSTtec

Integrated variety for consistent clearances
Deltasert_Pos2

DELTAsert®

Self-tapping for thermoplastics and thermosets.

Einschlagwerkzeug-LAL-500x500

Setting tool for drop-in anchors

Installation Tools

D?mmhalter DH_foto1

DH individual components

Insulation Support Anchor

For fixing insulation material
DH-zweiteilig

Insulation support anchor DH - 2 Piece

Insulation Support Anchor

For rear ventilated facade insulation
JT2-ST-2-6,8_Pos2

JT2-ST-2-6.8

Self-drilling Screws

Timber to steel and aluminium substructures
JT3-ST-2-6,0

JT3-ST-2-6.0

Self-drilling Screws

amongst others, rail systems to steel/alu timber substructure
Produktbild1

Concrete screw JC2-ST 6

Concrete / Aerated Concrete Screws

screw anchor with countersunk head
J6-Gurt_SW8-ET-4-8x120

SW 8 ET-4.8 belted

Top Flat Roofing

To fix roofing membrane
JZ7-6,3_foto2

JZ7-6.3

Self-tapping Screws

For steel substructures
JT3-FR-2H-4,8

JT3-FR-2H-4.8

Solar Products

Side lap fixing of steel / aluminium corrugated profile sheet
JT3-LT-3-5,5x25-Pos2

JT3-LT-3-5,5 KD12

Self-drilling Screws

Clip fix fastener
Montagespitze_foto01

Installation point

Insulation Support Anchor

for DH insulation support anchor
JW2-STS-6xL_500x500

JW2-STS

Timber construction

For fastening of timber or woodbased materials to timber substrates in weather-protected areas

EZI-Seal

EZi-Seal

Pipe Flashings

For waterproofing pipes on roofs
multifix-SE-Pos-2-500x500

Multifix SE1000 Seismic

Chemical Anchors

For installation in cracked and non-cracked concrete

Rohrmanschette_Retrofit

Retrofit

Pipe Flashings

Sealing of areas difficult to access

Premium 5

Pipe Flashings

seal for pipes and cables
DEKTITE_Premium3_500x500

Premium 3

Pipe Flashings

seal for pipes and cables
DEKTITE_Premium12_500x500

Premium 12

Pipe Flashings

seal for pipes and cables
JT4-STS-3-4,8x35

JT4-STS-3-4.8

Fastening plaster-base sheeting to aluminium substructure
Delta_PT_DS_Pos2_foto2

DELTA PT® DS

The self-tapping fastener for thermoset.
Strip-Flash

Strip Flash

Pipe Flashings

For rectangular pipe cross-section
bac-nc-500x500px

Through Bolts BA-C NC

Metal anchors and chemical anchors

Zinc electroplated steel

IND-Produktbilder-MicroAdjuster-2-EJOT

Adjustment Systems

Regulating headlamp adjustment systems.
BA-E-Plus_foto1

Through Bolts BA-E Plus

Metal anchors and chemical anchors

Stainless steel, A4
JT6-FR-6-5,5

JT3-FR-6-5.5

Self-drilling Screws

_ejotherm_VT2G_foto1

ejotherm® VT 2G

ETICS Tools & Accessories

Combi washer
EJOT_EPPsys_TSSD_2

EJOT TSSD®

Secure fastening solutions for honeycomb and foam materials
BA-V-Plus_foto1

BA-V Plus

Metal anchors and chemical anchors

Galvanized zinc-plated steel
Superplus BLS

LIEBIG® SUPERPLUS BLS

Metal anchors and chemical anchors

Self-undercutting anchor with threaded bolt, nut and washer
Superplus ILS

LIEBIG® SUPERPLUS ILS

Metal anchors and chemical anchors

With M8 internal thread
Superplus BLS-P

LIEBIG® SUPERPLUS BLS-P

Metal anchors and chemical anchors

Self-undercutting anchor for push through installation
BA-F-Plus_foto1

Through Bolts BA-F Plus

Metal anchors and chemical anchors

Steel, hot dip zinc-plated
Superplus BLS A4

LIEBIG® SUPERPLUS BLS A4

Metal anchors and chemical anchors

Self Undercutting Anchor
superplus-sls (1)

LIEBIG® SUPERPLUS SLS A4

Metal anchors and chemical anchors

Self-undercutting anchor with hexagon screw and washer
Easyboss_V_rot_Pos1_foto4

EASYboss® V

The flexible standard for variable component thickness.
ejotherm-STR-Tool-2GE_Pos 2_500x500

ejotherm® STR-tool 2GE

ETICS Tools & Accessories

assembly tool
Superplus SKLS A4

LIEBIG® SUPERPLUS SKLS A4

Metal anchors and chemical anchors

With threaded bolt, countersunk screw and countersunk insert
STR U

ejotherm® STR U

ETICS Anchors

universal screw-in anchor
abh-18-select

Cordless hammer drill ABH 18 Select

Accessories Solar

STR U 2G_foto2

ejotherm® STR U 2G

ETICS Anchors

universal screw-in anchor
IND-Produktbilder-EJOWELD-1CFF-SRE-REF-EJOT

EJOWELD®

Friction elements for demanding tasks in automotive structural engineering
IND-Produktbilder-CableAdjuster-2-EJOT

EJOT® FLEX Shaft

Flexible connection between original and new access point.
ASCD

Cordless impact screwdriver ASCD 18-300 W2 Select

Installation Tools

JT6-2_5-5,0-VARIO_Pos2

JT6-2/5-5.0 VARIO

Self-drilling Screws

To form floating and fixed points
IND-Produktbilder-KST-Strukturbauteile-EJOT

EJOT Structural Parts

Components for highest mechanical requirements.
IND-Produktbilder-MAXXtip

MAXXtip®

Direct fastening into high strength materials

Produktbild1

JT9-2/5-5.0 VARIO

Self-drilling Screws

To form sliding and fixed points on substructures of rear-ventilated facades
Battery Riveter ECORIV TWO

Battery Riveter ECORIV TWO

Installation Tools

For high-strength blind rivets made of all materials
EJOT_FLOWpoint_2

FLOWpoint DELTA PT®

Self-tapping fastener for carbon fibre reinforced plastics without pilot hole
EJOT Cell PT Schraube - Pos 2

CELL PT®

Thread-forming screw for cellular foamed thermoplastics
HTK-2G-TKR

HTK-2G-TKR (loose, pre-assembled)

Top Flat Roofing

Sheetracs_20_foto2

SHEETtracs®

Reliable assembly of pre-punched thin sheets
IND-Produktbilder-Sensorgehause-1-EJOT

Sensor Housings

Development and production of functional plastic parts with integrated contacts.

IND-Produktbilder-Deckel-2-EJOT

EJOT Covers

Development and production of functional plastic parts with integrated contacts.

IND-Produktbilder-Gehause-1-EJOT

Housing

Development and production of functional plastic parts with integrated contacts.

Bohrschraube Typ FD1

self-drilling screw type FD1

Window Production Screws

for reinforcement mounting
Pro-ASP-R06_01-500x500px

Pro ASP-R

Clip-on profiles

Plastic profile with glass fiber mesh for attaching to roller shutter boxes with an end strip protruding vertically downwards

Kopplungsschraube_MS-ST_4,8x80_25

coupling screw type MS

Window Installation Screws

coupling from window- and door profiles
Bohrschraube Typ FD2

self-drilling screw type FD2

Window Production Screws

for reinforcement mounting
[TKR-4_8].png

TKR-4.8

Self-drilling Roof Screws

Fastening stress plates to steel/timber
VHT-E-4,8_Pos2

VHT-E-4.8

Self-drilling Roof Screws

Fastening stress plates to steel/timber
VHT-R-4,8x80-Pos2_foto2

VHT-R-4.8

Self-drilling Roof Screws

Fastening stress plates to steel/timber
EJOPLAST sealant

EJOPLAST sealant

Pipe Flashings

Sealing of pipe flashings
EJOFORM_PT_Typ_DG_Kugelschraube_1

EJOFORM®

Flexibility with multi-stage forming technology.
Pro-GAP10-GF_01-500x500px

Pro GAP Giga Flex

Reveal beads with mesh

Self-adhesive plastic profile with glass fiber mesh, co-extruded flexible thermoplastic elastomer loop and bendable protective flap with self-adhesive transfer tape

Pro-GAP09-AF_01-500x500px

Pro GAP Active Flex

Reveal beads with mesh

Self-adhesive plastic profile with glass fiber mesh, co-extruded flexible thermoplastic elastomer loop and bendable protective flap with self-adhesive transfer tape

Pro-GAP09_01-500x500px

Pro GAP

Reveal beads with mesh

Self-adhesive plastic profile with glass fiber mesh, polyethylene foam tape and bendable protective flap with selfadhesive transfer tape

Anchor function principles – Heavy-duty anchor Guidebook Part 3

The metal cone must travel a certain distance inside the drop-in anchor in order to properly expand the sleeve in the borehole. The ETA-controlled setting tool ensures the correct distance. Advantages: Easy assembly (no setting tools, exception: drop-in anchors) Immediate load-carrying capacity (no curing times) Self-locking load bearing capacity: As soon as load is introduced via the add-on part, the cone bolt continues to pull into the sleeve.

Fasteners for solar and photovoltaic installations

DO YOU NEED INDIVIDUAL CONSULTATION?

Solar and photovoltaic systems on open spaces

Even 35 years after the Chernobyl disaster, the areas within the 10 km zone around the damaged reactor block 4 are not usable for humans. That doesn’t have to be the case, decided the Ukrainian company RODINA and the Hamburg-based ENERPARC AG, who joined forces and set up a solar park in the irradiated area.

EJOWELD

EJOWELD® offers the unique possibility to join different materials (lightweight material / high strength steel) with a robot suitable setting tool without any pre-treatment (cleaning, de-coating, pre-hole)...

Types of assembly – Heavy-duty anchor Guidebook Part 6

Heavy-duty anchors such as our BA Plus through bolts have a depth-of-set marking, which also facilitates pre-positioned installation: the anchor is hammered in up to the coloured marking and a correct setting depth is guaranteed without measuring effort. (4) Then the washer and nut of the anchor must be temporarily removed.

What is an anchor pull-out test for? – ETICS: Focus on service Part 1

ETICS: FOCUS ON SERVICE Read also the other parts of the series and learn more about our 360° service on the topic of ETIC systems. Part 2 – What must be taken into account with reveal beads with mesh? Part 3 – Why do I need a preliminary design? Part 4 – How do I determine the right anchor? Part 5 – How do I determine the right mounting element?

Plaster connections to windows – ETICS Expert tips Part 2

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail. wdvs@ejot.com

New machinery and real estate – EJOT® is investing heavily in Finland

With these measures, EJOT will meet the growing demand and ensure that manufacturing processes will continue to set standards in the future as well.

Solar and photovoltaic systems on the roof

EJOT® solar fastener The EJOT solar fastener set with sealing washer and ORKAN storm washer is the first ETA-certified stainless steel fastening element for fixing photovoltaic installations to trapezoidal profiles and sandwich panel roofs. For applications on corrugated fibre cement sheets, we recommend the set with an FDZ fibre cement seal. The main benefit is that all tensile and compressive forces are transferred directly into the substructure.

Mounting through bolts – How to avoid installation faults

How do through bolts work? Through bolts work by driving a steel bolt into the Base material. The correct setting depth can be easily determined by the black marking on the anchor.

Corona-Virus

EJOT Group information about the Corona Virus The EJOT Group is carefully monitoring the current developments. We have set up a task force that assesses the current situation on a daily basis and takes the necessary measures.

Environment | Supplier

Our customers expect top performance from us. This is why we set a high standard for the quality and service of our suppliers.

Types of anchoring with roofing membranes – Flat Roof Guidebook Part 2

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail: construction@ejot.com

The wind uplift test – Flat Roof Guidebook Part 4

The test setup for the wind uplift test consists of different components and is similar to a test roof setup.

Head styles and types of drives – Self-drilling screws Guidebook Part 2

For truss head screws such as the EJOT FR screws, we recommend a special setting tool for processing. The EJOT FR-Tool surrounds the screw head so that it rests on the fillets of the screw head and the screw is thus firmly seated.

Sustainability

But so far, Germany has fallen far short of its targets: the goal of 40 percent less greenhouse gas emissions compared to 1990, which was actually already set for 2020, was not achieved in 2021 either.

Solar park in Chernobyl makes irradiated areas usable

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail. construction@ejot.com

EJOT® Chemical Anchor Engineering

C2 seismic calculations, flooded holes, non-standard embedment Multiple temperature range selection / Lever Arm Fixed setting depth options / Concrete Class option.

Countersunk installation with ejotherm® STR U 2G

In addition to the special feature of countersunk installation covered with a cap for homogeneous surfaces, the ejotherm® STR U 2G offers many other advantages: Dual application – also flush installation Low anchoring and drill hole depths High loads for maximum safety and low anchor consumption 100 % setting control: countersinking of the plate signals secure anchoring Low thermal bridge effect For all use categories (A-E) and all insulation materials For fixing soffits No rework due to homogeneous insulation surface Uniform plaster application – simple and fast without milling dust Load increase in mineral wool in combination with additional washer ejotherm® VT 2G Suitable for ...

Higher load values, faster processing, better performance – Through bolts BA Plus

The advantages at a glance Anchoring in reduced concrete panel thickness: M8 (80 instead of 100 mm) and M10 (100 instead of 120 mm) More flexibility for different add-on part thicknesses through second installation depth in diameters M8, M10 and M12 Seismic performance values C2 in diameters M8 - M16 Increased installation safety through coloured setting depth marking. It marks the larger installation depth or the smaller clamping thickness respectively Head stamp: A letter identifier defines the respective anchor length.

Correctly inserting plastic facade anchors – Rear-Ventilated Facades Guidebook Part 4

For better differentiation, all EJOT anchors are coloured differently depending on the diameter and substrate of the setting area. This speeds up the correct selection and helps to avoid mistakes during installation.

EJOWELD®

This innovation offers the possibility of joining multi-material designs, in particular lightweight materials and ultra-high strength steels, with a friction welding fastener setting tool suitable for robot integration.

How to prevent anchor marks – ETICS Expert tips Part 1

The fact that the ''energy-saving facades'' have stood the test of time is due in large part to the ETICS washer anchor. And yet, in many places, you still see ugly patterns of light and dark spots on ETICS facades, also known as ''anchor marks''.

ejotherm® screw-in anchor S1 short – The all-rounder for thin insulation boards

The innovative assembly tool ejotherm® S1 short enables an optimal setting position. The integrated bit finding leads to a high level of assembly comfort – even in constrained positions.

Unrestrained fastening – Rear-Ventilated Facades Guidebook Part 7

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail. construction@ejot.com

Concrete screw JC2 Plus 14 – DIBt-approved for reusage into concrete

Features of the JC2 Plus: Two approved setting depths ETA for cracked and non-cracked concrete High load capacity Optimized thread design for improved cutting performance Optimized top shape facilitates installation Made in Finland The full range of JC2 Plus contains size 8, 10 and 14.

Calculation of wind load – Flat Roof Guidebook Part 5

Four terrain categories are defined: Terrain Category GK I: open sea, lakes with at least 5 km of open space in the direction of the wind; smooth flat land without obstacles Terrain Category GK II: terrain with hedges, individual farmsteads, houses Terrain Category GK III: suburbs, industrial or commercial areas Terrain Category GK IV: urban areas where at least 15 % of the area is covered with buildings whose average height exceeds 15 m.

Service Building Fasteners

The aim is to determine the load-bearing capacity of the selected fastener type depending on the individual setting/assembly method on the project-specific given fastening substrate – furthermore, the optimum fastener for your construction project can be determined.

EVO PT®

The evolution of direct fastening into plastics EJOT’s EVO PT® screw sets new standards in direct fastening into plastics.

ALtra CALC®

EJOT ALtracs® Plus screws are bespoke self-tapping fasteners for maximum strength of light metal joints up to a hardness of 140 HB (see image I). Based on a comprehensive research and development program, the prognosis program ALtra CALC® (see image II) has been developed specifically for this type of screw.

DELTA CALC®

The effect of these variations can be simulated with the program within realistic boundaries (see image II). With a tied-in material data bank a selection of approximately 350 different thermoplastics is available for the calculation of the joint.

Avoid assembly errors with self-drilling screws – Self-drilling screws Guidebook Part 5

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail: construction@ejot.com

EJOT für familien- und lebensphasenbewusste Personalpolitik ausgezeichnet

Das bedeutet, dass wir mit den Maßnahmen, die wir in den vergangenen Jahren stetig umgesetzt haben, einen hohen Qualitätsstandard erreicht haben“, betont Projektleiterin Michaela Wetter.

How do I determine the right anchor? – ETICS: Focus on service – Part 4

If you come across locked areas with a grey background, these are inactive fields that have already been filled in by presettings in the background. In the right-hand window you will see further information and help on selection options. Which anchor do I need for my application? In this part of our ETICS tip, we first want to take a closer look at the anchor area.

Fastening with reduced swarf on the facade | EJOFAST® screws

The EJOFAST® JF2-2H-4.8 is a side lap screw for the connection of cassette wall systems.

Industrial Division Services

The new Application Checks for FDS® screws, thermal adhesive bonding boss EJOT TSSD® and the friction welding process EJOWELD® offers you possibilities to determine benchmarks and to prove the feasibility of the respective joining task.

Industrial Division Services

The new Application Checks for FDS® screws, thermal adhesive bonding boss EJOT TSSD® and the friction welding process EJOWELD® offers you possibilities to determine benchmarks and to prove the feasibility of the respective joining task.

Why do I need a preliminary design? – ETICS: Focus on service Part 3

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail. wdvs@ejot.com

360° Service for ETICS

In just a few steps you will be guided through the program and get the right anchor and/or the right mounting element for the respective application of your building project.

Specialist in fastening technology

Want to expand your expert knowledge of fastening technology? Then get involved with our digital Expert Days (March 19 - 20, 2024).

Corrosion protection – Corrosion Guidebook Part 2

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail: construction@ejot.com

Compliance

It would have been unthinkable for him that, many years later, the obvious would need to be written down in form of compliance guidelines. Why does EJOT see a need for this now? Everyone agrees, that the service quality should be the convincing factor within a competitive environment, and not corruption, price-rigging or other measures that cannot be tolerated.

What must be taken into account with reveal beads with mesh? – ETICS: Focus on service Part 2

ETICS: FOCUS ON SERVICE Read also the other parts of the series and learn more about our 360° service on the topic of ETIC systems. Part 1 – What is an anchor pull-out test for? Part 3 – Why do I need a preliminary design? Part 4 – How do I determine the right anchor? Part 5 – How do I determine the right mounting element?

Whistleblower Guideline

EJOT is open to so-called whistleblowers and proceeds in accordance with the Whistleblower Directive of the European Union (EU Directive 2019/1937 of 26.11.2019 for the protection of persons who report violations of Union law) as well as the German Whistleblower Protection Act (Hinweisgeberschutzgesetz (HinSchG)). EJOT also commits itself to respect human rights and the environment and to take responsibility for its own supply and value chain.

FDS®

The chosen joining technology can ensure these goals are met. These different materials must be connected in a long-lasting and reliable way and of course able to withstand high loads.

Corporate Carbon Footprint

We want our employees to be able to balance work and family. Our innovative products and adherence to specific requirements make our customers another relevant stakeholder group.

Types of corrosion – Corrosion Guidebook Part 1

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail: construction@ejot.com

DELTA PT®

The EJOT DELTA PT® screw is a special fastener for reliable and trouble-free direct assembly into thermoplastic materials and due to its special thread forming zone it is also suitable for thermosets. A robust fastener with optimised thread geometry has been developed which offers a secure joint even under difficult conditions and in challenging designs.

EJOCLEAN®

The relative movement of the screws to one another and the associated re-contamination due to surface abrasion, but also the settling of air-borne particles onto the goods pose the greatest risks.

Supplier Registration | Purchasing

Essential criteria like price, quality, sustainability, adherence to delivery dates and flexibility considerably influence EJOT's purchasing decision.

EJOT the quality connection

As an international company we are accepting responsibility for the quality of our products and processes, for the adherence to international standards and certifications as well as uniform standards for quality and environmental management and occupational health and safety at all EJOT locations worldwide.

Edge distances of self-drilling screws and self-tapping screws – Self-drilling screws Guidebook Part 4

An important point when using fasteners is adherence to the necessary edge distances.

Embedment mechanisms at a glance – Rear-Ventilated Facades Guidebook Part 2

There are three different embedment mechanisms that form the basis for attaching a rear-ventilated facade: by frictional connection through expansion, guided connection through undercuts or adhesive bond through composite. The current part of our guide for rear-ventilated facades will illustrate how these three principles work and how they differ.

EJOT SE & Co. KG receives TOP 100 seal

EJOT SE & Co. KG receives TOP 100 seal

Contact Industrial Division

Address EJOT SE & Co.

How do I determine the right mounting element? – ETICS: Focus on service – Part 5

Part 2 – What must be taken into account with reveal beads with mesh? Part 3 – Why do I need a preliminary design? Part 4 – How do I determine the right anchor?

ArcelorMittal, Finkernagel, EJOT - how a sustainability chain works

Once again we see that low carbon-emissions steel is vital for building the infrastructure we need for the transition to carbon neutrality.

Change of corporate form to EJOT SE & Co. KG

We are pleased to inform you that EJOT GmbH & Co. KG will be transformed into EJOT SE & Co. KG as of February 1st, 2022. In a further step, EJOT Baubefestigungen GmbH will also be integrated into EJOT SE & Co. KG on April 1st, 2022. Please use the VAT-ID: DE 126 587 844 from this date on.

Heavy and safety-relevant attachments – ETICS Expert tips Part 4

For tips on installing light to medium heavy attachments on insulated facades, see our previous article. Heavy and/or safety-relevant attachments Heavy attachments are those that have a net weight of ≥ 15 kg.

Senior Professionals

You are a master in your field? You do not want to wait for the future anymore, but rather participate in shaping it?

Above-rafter insulation – determining the right screw

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail. construction@ejot.com

Fastening with reduced swarf on the roof | EJOFAST®self-drilling screws

At the same time, the drill tip of the EJOFAST® self-drilling screws does not produce any sharp-edged swarf that gets stuck in the material. This enables the fitters to work much more efficiently, as cleaning work to remove swarf on the roof is no longer necessary. Get to know our specific fastening solutions from the EJOFAST® family and learn more about the respective features and advantages.

Service

Do you have questions about our products or need technical advice?

System Performance

Our service hotline is available for technical questions, please contact: Phone: +49 2751 529-123 e-mail: hotline@ejot.com 08.00-12.00 a.m. - 13.00-17.00 p.m. (local time - CET)

Production of self-drilling screws – Self-drilling screws Guidebook Part 3

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail. construction@ejot.com

EJOT® at ARCHITECT@WORK in Berlin

Sustainability of the console convinces visitors It was in particular the aspect of low thermal conductivity which was met with great interest, since it enables a reduction of the cold transmittance values while maintaining the fire protection.

New dimensions for the product range: Fastening solar systems with reduced swarf

14.03.2024, Market Unit Construction Securely application on the surface, no tripping or slipping off, no sharp-edged swarf and yet a high assembly speed. The established EJOFAST® self-drilling screws by EJOT convince with these features.

Industrial Division

On our LinkedIn channel we keep you up to date on current topics and news. You can also get useful information about our products and applications.

Industrial Division

On our LinkedIn channel we keep you up to date on current topics and news. You can also get useful information about our products and applications.

Types of screws – Self-drilling screws Guidebook Part 1

Self-tapping screws Self-tapping screws are screws assembled with sealing washers without drill points. Self-tapping screws seal the bore hole towards the outside and thus protect it from wetness. They are therefore mainly used in outdoor areas on facades or roofs. Since the screws do not have a drill point, a through hole must first be made in a previous work step.

What is ... the clamp thickness?

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail: construction@ejot.com

Contact

EJOT SE & Co. KG Im Herrengarten 1 57319 Bad Berleburg Germany Phone: +49 2751 529-0 Fax: +49 2751 529-559 industrie@ejot.com

Fastening with reduced swarf in the field of air conditioning/ventilation technology EJOFAST® self-drilling screws

The EJOFAST® family for various applications in air conditioning and ventilation The drill tip of the EJOFAST® self-drilling screws produces no sharp-edged swarf that gets stuck in the material. This enables the fitters to work much more efficiently, as cleaning work to remove swarf, e.g. in the ventilation ducts, is no longer necessary. Get to know our specific fastening solutions from the EJOFAST® family and learn more about the respective features and advantages.

EJOFORM®

Depending on the customer's demand, free spin zones (undercut) or ball geometries can also be realised (see image I). The optimisation possibilities offered by this technology are best illustrated by an example. The cold-formed component (see image II, right) is produced in a multiple-stage cold-forming process and saves approx. 25% of material compared to a turned part (see image II, left).

EJOT anniversary page

With the charity events EJOT would like to get involved with projects at the different locations that are from the charitable area or that are related to environmental protection and nature conservation.

Contakt Construction

Address EJOT SE & Co. KG Market Unit Construction In der Stockwiese 35 57334 Bad Laasphe Germany

EJOT® JC2 concrete screws – Additional embedment depths and approved reusage

An additional, reduced embedment depth of 35 mm is now possible for multiple fastening of non-load-bearing systems in concrete (ETA 18/0221) using the JC2 concrete screws with a diameter of 6 mm and hexagon head (KB), truss head (FR) or countersunk head (ST). As well as the two installation depths of 35 or 40 mm for multiple fastening, a third installation depth of 55 mm can now be used for single fastening.

The Iso-Team – Fastening solutions for attachments

In just a few steps you will be guided through the program and get the right anchor and/or the right mounting element for the respective application of your building project.

Fastening with reduced swarf for solar installations | EJOFAST® self-drilling screws

The high assembly speed and the high load-carrying capacity of the EJOFAST® screws are of great advantage in this range of applications and increase the security of the fastening. Get to know our specific fastening solutions from the EJOFAST® family and learn more about the respective features and advantages.

Young Professionals

EJOT offers you more. 86 percent of our colleagues are proud to be a part of EJOT. 90 percent recommend EJOT as an attractive employer and 88 percent would like to still be working for EJOT in five years' time. Join EJOT and see for yourself.

Software

In just a few steps you will be guided through the program and get the right anchor and/or the right mounting element for the respective application of your building project.

Reduced swarf fastening | EJOFAST® self-drilling screws

The slim, single-fluted drill point does not produce any sharp-edged swarf that get stuck in the material and have to be removed at great expense.

EJOT Group focuses on North American market

In the existing joint venture "EJOTATF Fasteners de Mexico" (San Luis Potosi/Mexico), EJOT will also receive the majority of the company shares.

EJOT Bulgaria EOOD & Ko. KD

EJOT Bulgaria EOOD & Ko. KD Unfortunately, we do not have an internet presence for Bulgaria.

EJOT SPOJNA TEHNIKA d.o.o.

EJOT SPOJNA TEHNIKA d.o.o. Unfortunately, we do not have an internet presence for Croatia.

Competence

EJOT converts customer requirements into individual product solutions. We do not only consider the individual fastening point, but the entire component or assembly.

EJOT Construction Fastening Systems Inc.

EJOT Construction Fastening Systems Inc. Unfortunately, we do not have an internet presence for Canada.

New to the product range: EJOFAST® JF3-Plus selfdrilling screws

The slim, single-fluted drill tip means no sharp-edged swarf are produced that get stuck in the material and require time-consuming removal.

KERI-system

A complete system for renovation The KERI system Advantages of the KERI system Excellent rated values for transverse and flexural strength due to the structural shape of the anchor for a small minimum number of anchors No temperature restrictions in installation, as it is a purely mechanical system – without mortar Long-term safety and longevity, no signs of fatigue due to the exclusive use of stainless steel components Fire behaviour according to building material category A1 "non-combustible", as without flammable components Processing: only one drilling diameter of 42.5 mm throughout is necessary Less noise and vibrations compared to the hammer drilling process through the use of core dri ...

The colourful world of fasteners

DO YOU HAVE ANY FURTHER QUESTIONS? You are welcome to write us a mail: construction@ejot.com

Interior Work

DO YOU NEED INDIVIDUAL CONSULTATION?

Kuehne + Nagel, EJOT and Kreisbahn send pilot transport from the South Westphalia container terminal on its way

The Kreisbahn Siegen-Wittgenstein had commissioned DB Cargo with the rail transport from Kreuztal to Graz.