EJOT® facade anchor SDF-S-10V
Specification
-
Applications
- Installation of timber or metal attachments
- For multiple fastening of non-load-bearing systems according to EAD 330284
- Suitable for the structural fastening of gates, doors, windows, square timber
- For application as single fastening in concrete
-
Properties
- Countersunk head
- When used according to ETAG 020, embedment depth in concrete can be reduced to 40 mm (hnom,1)
- Very short expansion part for extremely fast installation
- Optimal expanding part due to radial expansion
- Very high bending moment
- Product identification through different sleeve colours
- Double safety lock against torsion for secure installation
Base materials
Approved for- Cracked concrete
- Non-cracked concrete
- Solid masonry
- Hollow and perforated bricks
Note
For planning and processing, please observe ETA-10/0305 and Z-21.2-2122. Further information about parameters and loads can be found in the approvals. For bricks of unknown quality, the load-bearing capacity must be determined through pull-out tests on the structure. -
Technical specifications
Characteristic values
- Diameter: 10 mm
- Hole depth in concrete h1.1: ≥ 50 mm
- Effective Embedment depth in concrete hnom,1: ≥ 40 mm
- Hole depth in masonry h1.2: ≥ 60 mm
- Effective Embedment depth in masonry hnom,2: ≥ 50 mm
- Drill-hole diameter d0: 10 mm
- Through hole diameter of component to be attached df:Ø 10.5 mm
- Drive: TX40
Admissible loads
- Tensile load NRk,p in concrete C12/15
- Temperature range 30 °C / 50 °C: 1.79 kN
- Temperature range 50 °C / 80 °C: 1.59 kN
- FRk brick Mz 20-1.8, NF: 0.71 kN
- FRk solid sand-lime brick KS 36, NF: 1.14 kN
- FRk solid sand-lime brick KS 20, 8 DF: 1.29 kN
- Transverse load VRk,s in concrete C12/15 at hnom,1 = 40 mm
- Steel screw (γMs = 1.25): 6.34 kN
- Transverse load VRk,s at hnom,2 = 50 mm
- Steel screw (γMs = 1.25): 8.87 kN
- Bending moment MRk,s at hnom,1 = 40 mm
- Steel screw (γMs = 1.25): 11.04 Nm
- Side load MRk,s at hnom,2 = 50 mm
- Steel screw (γMs = 1.25): 18.41 Nm
Further lengths available upon request
Filter
Selected filters
Orderidentifier | Article Number | ø mm | Material | Length mm | Clamping thickness (concrete)B ≥ mm | Clamping thickness (masonry) B ≥ mm | Unit |
---|---|---|---|---|---|---|---|
SDF-S-10Vx60-V | 8580060450 | 10.0 | Zinc plated | 60.0 | 20.0 | 10.0 | 100 |
Specifications
|
|||||||
SDF-S-10Vx70-V | 8580070450 | 10.0 | Zinc plated | 70.0 | 30.0 | 20.0 | 100 |
Specifications
|
|||||||
SDF-S-10Vx80-V | 8580080450 | 10.0 | Zinc plated | 80.0 | 40.0 | 30.0 | 100 |
Specifications
|
|||||||
SDF-S-10Vx100-V | 8580100450 | 10.0 | Zinc plated | 100.0 | 60.0 | 50.0 | 50 |
Specifications
|
|||||||
SDF-S-10Vx120-V | 8580120450 | 10.0 | Zinc plated | 120.0 | 80.0 | 70.0 | 50 |
Specifications
|
|||||||
SDF-S-10Vx140-V | 8580140450 | 10.0 | Zinc plated | 140.0 | 100.0 | 90.0 | 50 |
Specifications
|
|||||||
SDF-S-10Vx160-V | 8580160450 | 10.0 | Zinc plated | 160.0 | 120.0 | 110.0 | 50 |
Specifications
|
|||||||
SDF-S-10Vx180-V | 8580180450 | 10.0 | Zinc plated | 180.0 | 140.0 | 130.0 | 50 |
Specifications
|
CAD
* Thank you for your interest in our CAD data. To be able to use this area, simply log in or please register here.
CAD & more - Your Online Service Area
Unfortunately you currently have no authorization to use "CAD & more".
Unfortunately, this data can not be provided to you without the consent of the confidentiality agreement.
Your request will be manually verified, this can take 1 to 3 business days.
-
For technical questions please contact our Hotline Team +49 2751 529-123
Problems with your access? Mail to: service-industrie@ejot.com
Grant Access to CAD Data
Unfortunately you currently have no authorization to use "CAD & more".
Apply for access to CAD data.
-
For technical questions please contact our Hotline Team +49 2751 529-123
Problems with your access? Mail to: service-industrie@ejot.com
Thank you!
Your request will be manually verified, this may take 1 to 3 business days.
You will receive an e-mail as soon as your access for "CAD & more" has been activated.
Thank you for your patience.
-
For technical questions please contact our Hotline Team +49 2751 529-123
Problems with your access? Mail to: service-industrie@ejot.com
Confirm CAD data renewal
In the e-mail sent by us you will find the link to verify your account, please click on it.
If you do not receive an e-mail within a few minutes, please check your spam folder.
-
For technical questions please contact our Hotline Team +49 2751 529-123
Problems with your access? Mail to: service-industrie@ejot.com
Can not be renewed
Please contact our customer care
-
For technical questions please contact our Hotline Team +49 2751 529-123
Problems with your access? Mail to: service-industrie@ejot.com
Can not process your request for CAD
Please contact our customer care
-
For technical questions please contact our Hotline Team +49 2751 529-123
Problems with your access? Mail to: service-industrie@ejot.com