EJOTĀ® Pro ASP-R

Specification

  • Applications

    For the formation of a precise and stable plaster border with targeted water flow. Using the clip-on profile prevents direct contact between the roller shutter box and the plaster coating and any movements that occur are partially compensated for.

  • Properties

    • Targeted drainage of water
    • Exact and clean plaster finish
    • Better plaster grip thanks to the grooved surface
  • Technical specifications

    Hard PVC profile with glass fiber mesh 160 g, alkali-resistant and non-shifting. Mesh flag 12.5 cm.

    Processing guidelines
    Cut the profile to the required length with special scissors with beads. Position the clip-on profile offset by at least 10 cm from the joint area. Briefly fold the mesh forwards to apply the reinforcement compound. The mesh is then embedded in the wet reinforcement compound and filled in with a spatula in accordance with the alignment. The glass fiber mesh of the subsequent surface reinforcement must be pulled up to the plaster edge in order to counteract cracking in the joint area.

    Indications

    • Store in a cool and dry place
    • Transport and storage lying down

Filter

Selected filters

    Orderidentifier Article Number measure mm Unit
    EJOT Pro ASP-R06/01-200-160-WL-12.5 8805048002 6.0 25

    Specifications

    measure
    6.0
    Orderidentifier
    EJOT Pro ASP-R06/01-200-160-WL-12.5
    Unit
    25
    EJOT Pro ASP-R10/01-200-160-WL-12.5 8805048003 10.0 25

    Specifications

    measure
    10.0
    Orderidentifier
    EJOT Pro ASP-R10/01-200-160-WL-12.5
    Unit
    25