ejotherm washer anchors – anchor choice made easy

When fastening an ETICS, insulation boards are usually attached to the facade with adhesive and then fastened with anchors. The bearing load of the system is carried onto the insulation via shearing forces. High-quality washer anchors installed through the facade guarantee addi-tional contact pressure through their stiff plates. This contact pressure supports the permanent frictional bonding between adhesive and substructure. Through a powerful anchoring in the wall and the contact pressure of the washer, the tension of the insulation releases ("screw clamp effect").

ejotherm washer anchors with European Technical Approval offer certified safety even under high wind loads. Through their washer and the expansion element, they redirect the tensile load into the bearing substructure.

The washer anchors of the new ejotherm generation make things easy for you:

Easy anchor choice for safe anchoring in any building material. Together with a minimum anchor depth and maximum performance. Performance up, total cost down! For long-lasting, energy-saving facades.

                     The "screw-clamp effect" leads to
                     permanent contact pressure