ejotherm NT U

Universal hammer-in anchor

  • approved for concrete, solid and perforate masonry
     
  • solid steel nail (break-proof)
     
  • plastic injection moulding to reduce thermal bridges 
     
  • installable with additional plate
     
  • shortest anchorage depths, minimum drill hole depth
     
  • high loads for your security
     
  • economic anchor usage
     
  • premounted nail for quick installation
 

Here you will find our European Technical Approval (ETA-05/0009).

 

Technical data

anchor diameter           8 mm
plate diameter 60 mm
drill hole depth h1 ≥ 35 mm
anchorage depth hef ≥ 25 mm
use categories acc. to ETA A, B, C
European Technical Approval ETA-05/0009

 

Characteristic loads

concrete C 12/15 acc. to EN 206-1 1.2 kN
concrete C 16/20 - C 50/60 acc. to EN 206-1 1.2 kN
clay brick (Mz) acc. to DIN 105 1.5 kN
solid lime sandstone (KS) acc. to DIN EN 106 1.5 kN
solid bricks of lightweight concrete (V) acc. to DIN 18152 0.5 kN
vertical coring brick (Hlz) acc. to DIN 105 0.9 kN
perforated lime sandstone (KSL) acc. to DIN EN 106 1.5 kN
hollow block of lightweight concrete (HbL) acc. DIN 18151 0.5 kN

Regarding design loads the national safety factors are to be incorporated
(e.g. Germany: 3). Please observe the approval.

 

Product range

insulation (mm)  nominal length (mm) product name
new build.1) renovation2)
60 40 95 ejotherm NT U 095
80 60 115 ejotherm NT U 115
100 80 135 ejotherm NT U 135
120 100 155 ejotherm NT U 155
140 120 175 ejotherm NT U 175
160 140 195 ejotherm NT U 195
180 160 215 ejotherm NT U 215
200 180 235 ejotherm NT U 235
220 200 255 ejotherm NT U 255
240 220 275 ejotherm NT U 275
260 240 295 ejotherm NT U 295

1) 10 mm adhesive    2) 10 mm adhesive and 20 mm old render

 

Installation