EJOT VARIOboss® - the multifunctional and variable fastening solution
VARIOboss® overview:
- Field assembly in axial direction
- Tolerance compensation in all directions
- Decreased component weight
- Variable thicknesses of substructure possible
- Vibration safe fixing on substructure even without fastening
-
No Corrosion
-
Recyclable
The EJOT VARIOboss® is a multifunctional fastening system made of plastic. Main fields of application are field assemblies that require fastening elements with variable snap-on thicknesses due to varying thicknesses of the substructure. The " boss" is assembled through pushing in assembly direction into a square hole in the substructure. Manual as well as fully automated assembly is no problem with this special fastening element. Optimum functioning is guaranteed through a combination with the EJOT DELTA PT® screw.
After installation, the snapping hooks of the VARIOboss® HP return to their initial position. Due to the constant force of the connecting springs they will be permanently pressed against the substructure. Fastened with the EJOT DELTA PT® screw the snapping hooks cannot spring back resulting in a strong and reliable joint.
During insertion the flexible part of the VARIOboss® XPQ (eXtra Performance Quarter turn) is turned anti-clockwise by 45°. After pushing through the flexible part springs back locks the component in place. During fastening the flexible boss part is pulled towards the substructure and securely clamps the component.
