ejotherm® SDK U

Specification

  • Applications

    • Fastening of rail-systems
    • Screw-in anchor for rails
    • For fixing holding and base rails
    • Approved for all categories of building materials
  • Properties

    • Approved for all categories of building materials
    • Shortest embedment depths, minimum drill hole depths
    • Highest loads for maximum safety
    • Economic anchor usage
    • Premounted screw for quick installation
    • To compensate facade tolerances use spacers EJOT AS
  • Technical specifications

    Anchor diameter: 8 mm
    Collar diameter:16 mm
    Drill hole depth h1 >: 35 mm (75 mm)
    Embedment depth hef >: 25 mm (65 mm)
    Screw drive: TX30
    Use categories acc. to ETA: A, B, C, D
    German DIBt approval: Z-21.2-1769
    European Technical Approval: ETA-04/0023

    Values in parentheses: anchoring in aerated concrete (use category E)

ETICS products are only available from system suppliers

Filter

Selected filters

    Orderidentifier Article Number Anchor diameter mm Length mm Screw-in-/hammer-inanchor Unit
    ejotherm SDK U 045 8798045400 8.0 45.0 screw-in-anchor 100

    Specifications

    Anchor diameter
    8.0
    Length
    45.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Embedment depth = 25
    20.0
    Orderidentifier
    ejotherm SDK U 045
    Unit
    100
    ejotherm SDK U 065 8798065400 8.0 65.0 screw-in-anchor 100

    Specifications

    Anchor diameter
    8.0
    Length
    65.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Embedment depth = 25
    40.0
    Orderidentifier
    ejotherm SDK U 065
    Unit
    100
    ejotherm SDK U 085 8798085400 8.0 85.0 screw-in-anchor 100

    Specifications

    Anchor diameter
    8.0
    Length
    85.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Embedment depth = 25
    60.0
    Orderidentifier
    ejotherm SDK U 085
    Unit
    100
    ejotherm SDK U 105 8798105400 8.0 105.0 screw-in-anchor 100

    Specifications

    Anchor diameter
    8.0
    Length
    105.0
    Screw-in-/hammer-inanchor
    screw-in-anchor
    Embedment depth = 25
    80.0
    Orderidentifier
    ejotherm SDK U 105
    Unit
    100